Please select Into the mobile phone version | Continue to access the computer ver.
Firmware for P4P+ RC?
1740 23 2017-6-11
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans417abfbd
Second Officer
Flight distance : 434590 ft
United Kingdom
Offline

Can anyone tell me where to find the previous firmware for the P4P+ RC?
The AC is easy to do via Assistant 2 but RC needs to be done via the SD card and I am unable to find the firmware.
I did a test flight and some filming last night. The thing was dreadful, strong interference, weak signal, poor video. If these things aren't right that what other problems are there? It worries me that it will do something completely random and drop out of the sky at great expense or cause physical harm.
2017-6-11
Use props
imagine it
lvl.4
United States
Offline

It is not a firmware update to the RC, that is a software update and can not be rolled back without re-installing the app. Unfortunately on the P4P+ you do not have that option.
2017-6-12
Use props
imagine it
lvl.4
United States
Offline

I may be wrong about this and someone from DJI might correct me but I've yet to hear of anyone going back to an earlier version of the software on the P4P+. All the other P4P all you have to do is reinstall the ap on your tablet or phone but the device on the P4P+ does not allow you that option as far as I know.
2017-6-12
Use props
fans417abfbd
Second Officer
Flight distance : 434590 ft
United Kingdom
Offline

imagine it Posted at 2017-6-12 00:09
I may be wrong about this and someone from DJI might correct me but I've yet to hear of anyone going back to an earlier version of the software on the P4P+. All the other P4P all you have to do is reinstall the ap on your tablet or phone but the device on the P4P+ does not allow you that option as far as I know.

A case of Plus standing for less then. Maybe they should have called it the Phantom 4 -
Thanks for the reply
2017-6-12
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Have you tried to reset the Remote Controller to factory default? If yes, how is it going?  If it is still the same , please PM me your email address and more details about this issue, I'll look into it.
2017-6-12
Use props
fans417abfbd
Second Officer
Flight distance : 434590 ft
United Kingdom
Offline

DJI Thor Posted at 2017-6-12 00:47
Have you tried to reset the Remote Controller to factory default? If yes, how is it going?  If it is still the same , please PM me your email address and more details about this issue, I'll look into it.

I will try that at some point today and let you know the outcome. Thank you
2017-6-12
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

fans417abfbd Posted at 2017-6-12 01:16
I will try that at some point today and let you know the outcome. Thank you

You are welcome, should you have any further questions, please feel free to let us know,
2017-6-12
Use props
fans27f43bcd
lvl.1
Flight distance : 95620 ft
Croatia
Offline

fans417abfbd Posted at 2017-6-12 01:16
I will try that at some point today and let you know the outcome. Thank you

I'm in the same boat. Any idea how to reset Remote Controller to factory default?
2017-6-12
Use props
fans417abfbd
Second Officer
Flight distance : 434590 ft
United Kingdom
Offline

fans27f43bcd Posted at 2017-6-12 13:01
I'm in the same boat. Any idea how to reset Remote Controller to factory default?

Yes. Just downgrade to previous version using assistant 2 for your AC then go into settings on your RC and you will find factory settings re set.
It works ok, better than the latest firmware but still far from perfect. I did a test flight tonight and felt safer like this.
2017-6-12
Use props
jsantacroce
lvl.4
Flight distance : 10036 ft
United States
Offline

I've reset mine to factory default and still the same issues (Just made another post). Strong Interference, Constant Wifi Warning messages when I don't even have a phone near it, etc. I have the exact same issues and a factory reset does not fix them. DJI needs to do something here and we need to let them know it's not just one or two of us.

2017-6-12
Use props
fans417abfbd
Second Officer
Flight distance : 434590 ft
United Kingdom
Offline

jsantacroce@hvc Posted at 2017-6-12 17:26
I've reset mine to factory default and still the same issues (Just made another post). Strong Interference, Constant Wifi Warning messages when I don't even have a phone near it, etc. I have the exact same issues and a factory reset does not fix them. DJI needs to do something here and we need to let them know it's not just one or two of us.

Try setting transmission to 5.8. Do it in custom settings as leaving it in auto doesn't seem to work as it just reverts back to 2.4 and then keeps giving poor signal warnings. Yes DJI does need to know but do they care?
2017-6-12
Use props
fans27f43bcd
lvl.1
Flight distance : 95620 ft
Croatia
Offline

fans417abfbd Posted at 2017-6-12 13:16
Yes. Just downgrade to previous version using assistant 2 for your AC then go into settings on your RC and you will find factory settings re set.
It works ok, better than the latest firmware but still far from perfect. I did a test flight tonight and felt safer like this.

Thanks. I did the downgrade of AC and than factory reset of RC.  However the RC firmware is still v 1.2.0.0 and there is  no downgrade option for RC's firmware in RC's settings. I did few short test and it seems RC and AC can work together.
2017-6-13
Use props
fans07dedfb3
lvl.1
Flight distance : 537372 ft
Indonesia
Offline

fans27f43bcd Posted at 2017-6-13 10:39
Thanks. I did the downgrade of AC and than factory reset of RC.  However the RC firmware is still v 1.2.0.0 and there is  no downgrade option for RC's firmware in RC's settings. I did few short test and it seems RC and AC can work together.

Do u have the maps worked perfectly at your country? Some ppl said only china.
2017-6-13
Use props
Gerrit van S
lvl.1
Flight distance : 1227831 ft
Netherlands
Offline

Updated film of Phantom and my RC to latent. Maps where only China. Reset of RC turend out wel. Stil just lost of warnigs about interference but flying works wel to rangen over 1250m.
2017-6-13
Use props
mzgm
lvl.1
Flight distance : 95620 ft
Croatia
Offline

fans07dedfb3 Posted at 2017-6-13 13:39
Do u have the maps worked perfectly at your country? Some ppl said only china.

Yes, I tested my P4P+ and have maps for my country, Croatia, Europe and for the moment AC firmware is V1.03.0509 and RC is V.1.2.0.0.  For me it's not clear is this combo approved by DJI?

I downgraded my AC from V1.04.0602 to  V1.03.0509 and did factory default reset of RC because:

1. After upgrade with  V1.04.0602 I got a lot of strange warnings some of them were about Wi-Fi and 2.4Ghz,  
2. I got the warning to upgrade my no fly zone database. I tried to do this few times but without success, during upgrade some wrong IP address was reported despite I have been on internet and did all other upgrades without problems.   

So it seems the users of P4P+ can downgrade the AC firmware only and the users of P4P can do it on both AC and RC. I guess it should be fixed for P4P+ users.
In the mean time I have changed my user name from fans27f43bcd to mzmg. Has no idea why Estonia is reported as my country!? My country is Croatia.
2017-6-13
Use props
AdZaM
Second Officer
  • >>>
Australia
Offline

This seems to be a link that was provided on a different Forum. It is a previous update for the P4P+ controller i.e-:GL300E.

https://dl.djicdn.com/downloads/ ... _v1130_20170307.zip

Could be worth a try to achieve a downgrade.
2017-6-14
Use props
fans07dedfb3
lvl.1
Flight distance : 537372 ft
Indonesia
Offline

mzgm Posted at 2017-6-13 21:44
Yes, I tested my P4P+ and have maps for my country, Croatia, Europe and for the moment AC firmware is V1.03.0509 and RC is V.1.2.0.0.  For me it's not clear is this combo approved by DJI?

I downgraded my AC from V1.04.0602 to  V1.03.0509 and did factory default reset of RC because:

Nice info man
Can you info me result of your downgrade.
If normal (no warning 2,4ghz whatsoever) i'm gonna follow you to downgrade

The newest AC firmware i got HD downlink video issue 2,4ghz all channels red like hell fly couple mins laggy and chopy stream. Changed to 5ghz still have the issue even channels are blue.
2017-6-14
Use props
mzgm
lvl.1
Flight distance : 95620 ft
Croatia
Offline

AdZaM Posted at 2017-6-14 00:37
This seems to be a link that was provided on a different Forum. It is a previous update for the P4P+ controller i.e-:GL300E.

https://dl.djicdn.com/downloads/phantom_4_pro/20170307/GL300E_RC_v1130_20170307.zip

Thanks a lot, hope I will be able to downgrade my RC too!
2017-6-14
Use props
mzgm
lvl.1
Flight distance : 95620 ft
Croatia
Offline

fans07dedfb3 Posted at 2017-6-14 08:27
Nice info man
Can you info me result of your downgrade.
If normal (no warning 2,4ghz whatsoever) i'm gonna follow you to downgrade

I tested AC firmware V1.03.0509 and RC  V.1.2.0.0 combo and it doesn't work for me (false warnings like: conflicting with 2.4GHz despite I set 5GHz only, all the time strong interference - fly with caution, firmware upgrade required etc). So as I got the download link  above I will try to downgrade my RC too. Hope the old firmware will fix the issues.
2017-6-14
Use props
mzgm
lvl.1
Flight distance : 95620 ft
Croatia
Offline

AdZaM Posted at 2017-6-14 00:37
This seems to be a link that was provided on a different Forum. It is a previous update for the P4P+ controller i.e-:GL300E.

https://dl.djicdn.com/downloads/phantom_4_pro/20170307/GL300E_RC_v1130_20170307.zip

I tried. No success! After downgrade my RC with v1130 during power up I got the message on the screen: Unfortunately, DJI GO 4 has stopped. No way to start RC any more .

OMG I'm in Russian Federation now!
2017-6-14
Use props
mzgm
lvl.1
Flight distance : 95620 ft
Croatia
Offline

mzgm Posted at 2017-6-14 22:13
I tried. No success! After downgrade my RC with v1130 during power up I got the message on the screen: Unfortunately, DJI GO 4 has stopped. No way to start RC any more .

OMG I'm in Russian Federation now!

I resolved it. With the small buttons at the edge of the screen I got the system settings window and started factory reset including clearing all SD data. After that DJI GO 4 works well and downgrade (v1.1.3.0) step is done  for my RC . It seems I have all as before............. Uh
2017-6-14
Use props
AdZaM
Second Officer
  • >>>
Australia
Offline

mzgm Posted at 2017-6-14 22:51
I resolved it. With the small buttons at the edge of the screen I got the system settings window and started factory reset including clearing all SD data. After that DJI GO 4 works well and downgrade (v1.1.3.0) step is done  for my RC . It seems I have all as before............. Uh

Glad it all worked out for u, Also appreciate you lettings us know how you got on and got the issue resolved.  Well Done...
2017-6-15
Use props
神盾局局长
lvl.1
Flight distance : 1119469 ft
  • >>>
Hong Kong
Offline

mzgm Posted at 2017-6-14 22:51
I resolved it. With the small buttons at the edge of the screen I got the system settings window and started factory reset including clearing all SD data. After that DJI GO 4 works well and downgrade (v1.1.3.0) step is done  for my RC . It seems I have all as before............. Uh

Can U tell me haw to  downgrade to V 1.1.3.0 for RC ?
2018-3-24
Use props
Tearuup
lvl.4
Flight distance : 123760 ft
United States
Offline

mzgm Posted at 2017-6-14 21:45
I tested AC firmware V1.03.0509 and RC  V.1.2.0.0 combo and it doesn't work for me (false warnings like: conflicting with 2.4GHz despite I set 5GHz only, all the time strong interference - fly with caution, firmware upgrade required etc). So as I got the download link  above I will try to downgrade my RC too. Hope the old firmware will fix the issues.

I had that conflict with 2.4 and turned out be be my wifi was on.  Swipe down and turn off your wifi.  Not needed.  That is where your conflict is.
2018-3-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules