Just received my magic pro.
using iphone + dji gpo 4

no update seems required, anyone in the same situation? did they are now sending magic with last updated version?
don't know where to check the firmware version

Where do you buy magic from?
I dont think that model is released yet.

Bent Kangaroo Posted at 2017-1-24 20:32
Where do you buy magic from?
I dont think that model is released yet.

hahah yes no magic pro .. mavic

I just powered the Mavic on after receiving it two days ago and noticed it had an new firmware revision v01.03.0300.  Anyone aware if there are any release notes?

Can someone tell me where to find the firmware version?
THX

icerecou Posted at 2017-1-25 14:45
Can someone tell me where to find the firmware version?
THX

If it's been pushed out, it will show up in your remote as an update nag when your remote has been connected to your internet-connected phone or tablet.

MY MAVIC cam with the v01.03.0300 fw also. Now how to verify if all the batteries are up to date? Do i simply turn on the mavic with each batter and see if the Go app reports fw update needed or not?

fans464c96e6 Posted at 2017-1-26 07:23
MY MAVIC cam with the v01.03.0300 fw also. Now how to verify if all the batteries are up to date? Do i simply turn on the mavic with each batter and see if the Go app reports fw update needed or not?

Yup. Connect the battery, reconnect, and look for the upgrade prompt. If your Mavic came with the latest firmware and the batteries shipped with the Mavic, I'd expect the batteries to also be updated, but certainly a good idea to check.

Bent Kangaroo Posted at 2017-1-24 16:05
I am no software expert but i would guess both of those apps share resources which could cause issues.
I use only app3 and have no intention to experiment while everything is working fine.
If you want to use 4 i would suggest removing 3 first, but this is simple precaution.

Just before Christmas I started and ended a thread for a problem that I assumed was related to exactly this.  In the end I uninstalled both apps completely including all the data files, then reinstalled go4 fresh and now everything is fine.

I'm not sure when this happened but Google added a backup option to apps so that if you delete and reinstall, the default option is to copy back all of the data files from the backup when you install the app.  You can turn the option off, of you can go into the app settings and "Clear Data" after installing.  

I can't prove it but I'm still going to believe that having both installed causes problems.

fans464c96e6 Posted at 2017-1-26 07:23
MY MAVIC cam with the v01.03.0300 fw also. Now how to verify if all the batteries are up to date? Do i simply turn on the mavic with each batter and see if the Go app reports fw update needed or not?

Wonder what the difference are between v01.03.0200 and v01.03.0300. DJI, any thoughts when v01.03.0300 will be released to the broader public?

JoostBoZ Posted at 2017-1-27 03:09
Wonder what the difference are between v01.03.0200 and v01.03.0300. DJI, any thoughts when v01.03.0300 will be released to the broader public?

If you don't have the new version, use DJI Assistant 2 and chances are you will get the update.  It was substantial in size so I suspect it must cover a number of issues.

Has anyone received the firmware update 03.0300?? Any issues since updating?

Its not available to us yet. People are getting it from the factory.

Ok just seeing if it may had fixed a few issues some have experience with .0200. Not sure wether to update to 03.0200 or not yet

I have 2 Mavics, I received one at the beginning of January and one last week. One has .0200 and the other has .0300. So far the only thing I've noticed is the remote calibration is different, but I haven't seen anything else. There could be other changes I haven't seen/noticed.

Speed_Freak_039 Posted at 2017-1-29 18:03
Its not available to us yet. People are getting it from the factory.

I'm hoping this has the VPS issues fix in it.    Waiting anxiously.

That nice.

dfgdrsgdsr

I Work with a PC, try to update with assistant 2 and he dont reconize my mavik, he show how to connect with Inspire 2. i'll try to upgrade with the RC and the upgrade allways fail, what i do wrong?

fans464c96e6 Posted at 2017-1-26 07:23
MY MAVIC cam with the v01.03.0300 fw also. Now how to verify if all the batteries are up to date? Do i simply turn on the mavic with each batter and see if the Go app reports fw update needed or not?

My new Mavic also came with the v01.03.0300 FW. No updates needed when connecting. However, my Remote is still at v01.03.0200, and not sure on the batteries. I thought they all had to match?

Don't know with the remote, but I've flown  with a battery one firmware version behind once (then I upgraded), and it appears possible to fly like that. Not recommended of course, but things seemed completely fine during my flight.

Hopefully they have resolved the gimble hitting issue during calibration, the process just needs to be slightly slower.

Hope they add duel device display via DJI GO 4. Want to connect iPad while flying with iPhone. Dont trust Litchi, Facebook LiveStream on the DJI GO 4 App is not working, I tried and it was a black screen and only took in the audio, had to Facebook LiveStream using the old DJI Go App.

I've been trying to download the firmware for my Mavic but when i begin to download my wifi goes off on my iPad . It seem that it's the aircraft that makes the wifi go out...because when I shut the Mavic down I get the wifi back...can you help?

Mine has arrived with 01.03.300, 'no update found'.

Just received mine today and it is running 01.03.300 also.  Nothing to compare it to as far as other DJI as this is my first DJI product, FINALLY!  

Great! Hope more fuction coming soon!

great firmware

Drone Odyssey Posted at 2017-2-5 13:36
I've been trying to download the firmware for my Mavic but when i begin to download my wifi goes off on my iPad . It seem that it's the aircraft that makes the wifi go out...because when I shut the Mavic down I get the wifi back...can you help?

I think it is designed that way. When I first got my Mavic in December, I was getting a warning in the DJI GO app to turn off wifi as it was interfering with the signal. After the app was updated, the warning no longer appeared even when wifi was still turned on so I think the updated app turns the wifi off to stop any interference.

Jenee 2 Posted at 2017-2-7 20:01
I think it is designed that way. When I first got my Mavic in December, I was getting a warning in the DJI GO app to turn off wifi as it was interfering with the signal. After the app was updated, the warning no longer appeared even when wifi was still turned on so I think the updated app turns the wifi off to stop any interference.

Why isn't the .300 firmware available online yet.

My guess is DJI made hardware changes to the Mavic to eliminate bugs and that firmware is not compatible with the existing Mavics?

I cant see any other reason...

I have been wondering about the elusive, undocumented-by-DJI .0300. Gave up checking for updates at this point. Happily, my Mavic seems to work fine as it is.

There may be some critical bugs found in .300 so they decided to not to make it public.
Will see if the .300 will be published or will it .300+

I heard mavic doesn't work well with android devices is that true?

fansea692431 Posted at 2017-2-9 04:42
I heard mavic doesn't work well with android devices is that true?

It probably depends on the device model and OS version. My Android's been fine with it.
Some people find Litchi works better for them, some find DJI GO does, some find DJI GO 4, and some can use any 2 of these or all 3 without any kind of trouble.
I've never seen any of these apps running on an iOS device, since the only iPad in the house isn't compatible with DJI GO. And that's perfectly okay by me.

fansea692431 Posted at 2017-2-9 04:42
I heard mavic doesn't work well with android devices is that true?

I am having no difficulty with a Nvida shield running 6.0, the graphics and display work very well.
Regards,
-d.

Sergey_B Posted at 2017-2-8 21:37
There may be some critical bugs found in .300 so they decided to not to make it public.
Will see if the .300 will be published or will it .300+

Works fine with all my Android devices! If they all only worked on Crapple Devices I would not buy a Drone!!

Drone Odyssey Posted at 2017-2-5 13:36
I've been trying to download the firmware for my Mavic but when i begin to download my wifi goes off on my iPad . It seem that it's the aircraft that makes the wifi go out...because when I shut the Mavic down I get the wifi back...can you help?

Can you use DJI Assistant 2 on your computer to update firmware? It could at least be a workaround to your problem, perhaps.

mine came with a newer version. i downgraded to this version when i was having gimbal issues. i tried installing the .300 version again but can't seem to find it? where is it?

BBZ149 Posted at 2017-2-9 12:03
Works fine with all my Android devices! If they all only worked on Crapple Devices I would not buy a Drone!!

:-) this will never end :-) That's why competition is good and monopole is bad...;-)

SeanOzz Posted at 2017-2-10 09:02
mine came with a newer version. i downgraded to this version when i was having gimbal issues. i tried installing the .300 version again but can't seem to find it? where is it?

The ,0300 isn't available to the public yet, I believe.

Anyone who doesn't have .0300 on their Mavic right now, as in, it shipped like that and still has that version, cannot get that version, period.

I checked. (Daily for 2 weeks in Go and Assistant. Then, daily in the forums.)