Scarves UP
First Officer
Flight distance : 372992 ft
United States
Offline
|
djiuser_QGY15nRe0dPF Posted at 11-16 16:07
Found a fix for the Mavic Mini & Mini 2 gimbal "super shake". I've had the Mini 2 for about a week with no more than about 6 flights. Today, after powering it on, it gave me a "downward facing sensor error" and started shaking the gimbal uncontrollably. Up down, left and right, the camera/gimbal had a mind of its own and looked like a Home Depot paint shaker. I tried everything from restarting the drone, the controller, the app including my actual tablet. Also tried doing multiple gimbal recalibrations inside the app to no avail. It just stopped at 10% calibration. Yes, I do have the latest firmware. So as instructed, I opened up an online service request and was instructed to send the Mini 2 back to tech support. But just as a test, I tried powering up the Mini 2 while holding it about a foot off the ground. Presto!! it worked fine, no gimbal shake and no "downward vision sensor error" message. So far so good. So if anyone has this same issue, try powering your Mavic Mini or Mini 2 while holding it about 12 inches off any surface and hopefully this will sort out any of these issues.
Dont have the issue, but |
|