I've had some issues with the new firmware related to user settings.
1) if you save a profile and reboot the camera it doesn't load with that profile. It just starts with the N/A profile.
2) if you save gimbal parameters (I think PAN and dead and) - some of the parameters don't reload with your profile. You have to switch back and forth and eventually the parameters load.
I've reset the firmware twice and still she these issues. I'm pretty sure they weren't a problem on the original firmware.
Hi, there.
We are sorry for your inconvenience.
Could you please tell us more details of the profiles and parameters you mean, and could you please send us a video so that we can better confirm?
Thank you for your support.
Thanks for the reply.
Please note that when you update this post, please reply to me directly or you can also send me a PM.
If you reply to this post directly, I might miss it.
Thank you for your understanding.
We have been using the 4D for about 30hrs last week, one of the bugs I wanted to report was this one. If changing a battery not all the profile settings remain set. It looked like random settings would switch to default or for the stabilizer 0..for example the tilt axis speed will be 0 in place of medium. You cant see or adjust the gimbal settings while filming (WHY???) so we had a ruined shoot sadly because we presumed it would keep the settings like every other camera & gimbal. It does some of the time...its seems to be random.
DJI Natalia Posted at 9-28 00:38
Hi, there.
We are sorry for your inconvenience.
Could you please tell us more details of the profiles and parameters you mean, and could you please send us a video so that we can better confirm?
Hi Natalia, Here is the clip of the R4D with latest firmware not storing or loading the profile "RONE" with correct gimbal parameter.
You can see I saved this just before thet reboot and when it loaded up profile was N/A.
Hi Natalia, Here is the clip of the R4D with latest firmware not storing or loading the profile "RONE" with correct gimbal parameter.
Hi, there.
Thanks for the feedback, we are confirming this problem with the relevant team and it may need to time to check, we will reply you asap, please don't worry.
If you need any other support, please let us know as well.
BerthaVision Posted at 10-7 06:50
We have been using the 4D for about 30hrs last week, one of the bugs I wanted to report was this one. If changing a battery not all the profile settings remain set. It looked like random settings would switch to default or for the stabilizer 0..for example the tilt axis speed will be 0 in place of medium. You cant see or adjust the gimbal settings while filming (WHY???) so we had a ruined shoot sadly because we presumed it would keep the settings like every other camera & gimbal. It does some of the time...its seems to be random.
Hi, there. We are sorry for the inconvenience caused.
May we know if your problem is resolved now?
If not, may we confirm if you meet the same problem of rone4d?
Thank you in advance.
DJI Natalia Posted at 11-5 18:49
Hi, there. We are sorry for the inconvenience caused.
May we know if your problem is resolved now?
If not, may we confirm if you meet the same problem of rone4d?
yes it looks like I have also the same issue Rone4d, its not just on saving a profile, but also randomly when just changing a battery & restarting the unit. Sometimes the axis speed goes to 0. I have noticed that if you do a factory reset & leave everything at default its remained at the default setting (50). The issue appears to happen when making any changes to the very limited set of gimbal settings.
BerthaVision Posted at 11-6 06:15
yes it looks like I have also the same issue Rone4d, its not just on saving a profile, but also randomly when just changing a battery & restarting the unit. Sometimes the axis speed goes to 0. I have noticed that if you do a factory reset & leave everything at default its remained at the default setting (50). The issue appears to happen when making any changes to the very limited set of gimbal settings.
Thanks for your update.
We are confirming this problem with the relevant team, and we will keep you updated here.
Thank you for your understanding.
Hi Natalia, Here is the clip of the R4D with latest firmware not storing or loading the profile "RONE" with correct gimbal parameter.
Update:
We have confirmed with the relevant team and we will solve this problem in the next firmware. Please stay turn to our official website.
Thank you for your understanding.
BerthaVision Posted at 11-6 06:15
yes it looks like I have also the same issue Rone4d, its not just on saving a profile, but also randomly when just changing a battery & restarting the unit. Sometimes the axis speed goes to 0. I have noticed that if you do a factory reset & leave everything at default its remained at the default setting (50). The issue appears to happen when making any changes to the very limited set of gimbal settings.
Update:
We have confirmed with the relevant team and we will solve this problem in the next firmware. Please stay turn to our official website.
Thank you for your understanding.