New Firmware for Phantom 3 Pro/Adv has been Released
Home / Products / Phantom Series / Phantom 3 Pro/Adv
1 ...234567891011... 12879Next >
515158 515158 2016-6-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
braddoll13
lvl.2
Flight distance : 42346 ft
+ Add Friend Person Message
United States
Offline

  241#
And I'm talking remote only,  the p3p had been on newest.  Just problems with my remote.  Seems to be good,  wish i knew how to upload my ss
2016-6-24
Use props
Gerrie Warner
lvl.2
Flight distance : 223684 ft
+ Add Friend Person Message
Sweden
Offline

  242#
My son is VERY proficent at these sort of things ... we've tried his ipad and other Samsung tabletts to NO AVAIL!!  .. downloaded all the updates and into a few minutes of flight the laging is far too serious to be able to fly. Also lost signal,  freeze frame etc ... it was NOT doing this when I initially bought the drone a few months ago.  What can be done to eliviate this? I need the drone for my work so it's not just a toy for me.   Would rolling back the updates on the firm wear help?   Where can I find the older editions?  Also The DJI cable from tablett to Controler is not a good as a standard one I have for other devices .. it's looser and loses contact with the controler ...  !!!!
2016-6-24
Use props
braddoll13
lvl.2
Flight distance : 42346 ft
+ Add Friend Person Message
United States
Offline

  243#
On dji website, just Google firmware update fir p3p, and you'll find a link lol. It's such a proplem, it's all over.
But id go there,  and download the 1.8.? Can't remember.  But the last one b4 the newest is available
2016-6-25
Use props
braddoll13
lvl.2
Flight distance : 42346 ft
+ Add Friend Person Message
United States
Offline

  244#
Than Id make sure remote is latest version,  since it had to be on with bird for update,  and than re update to the latest again.
Each time taking your sd card out after update,  to check and see if successful,  and than format b4 putting back in bird.  
I'm hoping mine is all good now.  As far as a constant, update remote warnning, even though it was of latest.  I still might have loss a signal.  I haven't checked that far out yet..
2016-6-25
Use props
mrbill
lvl.4
Flight distance : 717100 ft
+ Add Friend Person Message
United Kingdom
Offline

  245#
Gerrie Warner Posted at 2016-6-25 06:19
My son is VERY proficent at these sort of things ... we've tried his ipad and other Samsung tabletts ...

As long as it's a proper Apple spec cable, you don't need to use the dji one
2016-6-26
Use props
DJI-Ken
DJI team
Flight distance : 1515312 ft
  • >>>
+ Add Friend Person Message
United States
Offline

  246#
mrbill Posted at 2016-6-27 14:52
As long as it's a proper Apple spec cable, you don't need to use the dji one

DJI does not provide an IOS cable. the aircraft are sold with a standard micro USB cable (Android)
2016-6-27
Use props
jacmac64
lvl.3

+ Add Friend Person Message
Offline

  247#
Well I've given up with this firmware update. I tried multiple times to update and failed every time including loss of video. I've re-downloaded, gone back to  v1.8.80 ( and it loads and works as always), and used multiple sd cards. Nothing has worked, so I'm staying with  v1.8.80.



========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
2016-6-27
Use props
mrbill
lvl.4
Flight distance : 717100 ft
+ Add Friend Person Message
United Kingdom
Offline

  248#
DJI-Ken Posted at 2016-6-27 18:06
DJI does not provide an IOS cable. the aircraft are sold with a standard micro USB cable (Android)

There are dji branded Apple,cables on eBay - I assumed that was what the op was talking about
2016-6-27
Use props
DJI-Ken
DJI team
Flight distance : 1515312 ft
  • >>>
+ Add Friend Person Message
United States
Offline

  249#
mrbill Posted at 2016-6-28 15:36
There are dji branded Apple,cables on eBay - I assumed that was what the op was talking about

Those may be branded DJI, buy not made by DJI or sold by DJI.
I'm sure your safer with a OEM Apple cable.
I use this cable and it is awesome and many many users use the the same one.
https://www.amazon.com/Cambond-S ... ond+lightning+cable
2016-6-28
Use props
braddoll13
lvl.2
Flight distance : 42346 ft
+ Add Friend Person Message
Offline

  250#
I finally found the proper sequence in firing every thing up.  I really didn't think it mattered lol.
But yes,  remote, aircraft,  than,  than dji go app.
I've had 6 successfull flights with little interference and no more, Update controller needed,  message! Yay
2016-6-28
Use props
T-Rex
lvl.3
Flight distance : 966148 ft
+ Add Friend Person Message
Italy
Offline

  251#
Hi,
I have P3A since 2 months (so I am newbie) and I am on fw 1.8.80 for the aircraft and fw 1.6 for the RC and the last iOS App on an Ipad Mini. I am a bit scared in upgrading because the changes in this last firmware 1.9.60 are related to cold battery issue (I am in Italy and it is summer) and NFZ and therefore those changes do not seem to be so important, but the  upgrading process and recalibration process are somehow critical operations and the refore I do not want risk to cause more damages than benefits.
What do you suggest me to do ?
Ciao !
2016-6-29
Use props
sommersports
lvl.2
Flight distance : 28386 ft
+ Add Friend Person Message
United States
Offline

  252#
I'm having trouble upgrading the firmware to 1.09.06 in a new DJI Phantom 3 Professional.  I've tried many times using all the tips others have provided.  After a couple of failed attempts at the start I also tried version 1.08.04 because I noticed the quad came with 1.04.01 loaded.

Here's the log file:

[00012228][01 00] Firmware upgrade finished successfully.
[00012334]Done.

[00012365]Packet [C:\P3X_FW_V01.04.0010.bin] resumed, card sn [0x80ce622c].
[00012400]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012466]Version checking[2]...
[00012526][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012591][03 06][00] v2.1.6.18 -> v2.3.0.13 need upgrade.
[00012640][04 00][00] v1.36.0.0 -> v1.41.0.0 need upgrade.
[00012695][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012806][11 00][00] v1.6.0.0 -> v1.7.0.0 need upgrade.
[00012879][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00012954][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013034][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013099][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00013237][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013314][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00013436][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00013494][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013529][01 00][05] v1.23.3419 -> v1.23.3419
[00013561][01 01][00] v1.6.2736 -> v1.23.3419 need upgrade
[00013604][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013636]Done.

[00013669]Firmware upgrading[2]...
[00013814][01 01] Firmware upgrade start...
[00044074][01 01] Firmware upgrade finished successfully.
[00044973][08 00] Firmware upgrade start...
[00552713][08 00] Firmware upgrade finished successfully.
[00552765][12 00] Firmware upgrade start...
[00621328][12 00] Firmware upgrade finished successfully.
[00621378][12 01] Firmware upgrade start...
[00692849][12 01] Firmware upgrade finished successfully.
[00692900][12 02] Firmware upgrade start...
[00756192][12 02] Firmware upgrade finished successfully.
[00756255][12 03] Firmware upgrade start...
[00817173][12 03] Firmware upgrade finished successfully.
[00817234][17 00] Firmware upgrade start...
[00902076][17 00] Firmware upgrade finished successfully.
[00902122][17 01] Firmware upgrade start...
[00963337][17 01] Firmware upgrade finished successfully.
[00963465][11 00] Firmware upgrade start...
[01017075][11 00] Firmware upgrade finished successfully.
[01017127][03 05] Firmware upgrade start...
[01087844][03 05] Firmware upgrade finished successfully.
[01088074][03 06] Firmware upgrade start...
[01425534][03 06] Firmware upgrade finished successfully.
[01425599][04 00] Firmware upgrade start...
[01483708][04 00] Firmware upgrade finished successfully.
[01483743]Done.

[01483776]Version checking[3]...
[01483860][03 05][05] v34.2.0.9 -> v34.2.0.9
[01483936][03 06][05] v2.3.0.13 -> v2.3.0.13
[01483977][04 00][05] v1.41.0.0 -> v1.41.0.0
[01484026][09 00][00] v1.7.0.3 -> v1.7.0.3
[01484138][11 00][05] v1.7.0.0 -> v1.7.0.0
[01484228][12 00][05] v1.10.0.0 -> v1.10.0.0
[01484322][12 01][05] v1.10.0.0 -> v1.10.0.0
[01484408][12 02][05] v1.10.0.0 -> v1.10.0.0
[01484511][12 03][05] v1.10.0.0 -> v1.10.0.0
[01484645][15 00][00] v1.1.2.0 -> v1.1.2.0
[01484722][17 00][05] v1.1.1.7 -> v1.1.1.7
[01484845][17 01][05] v1.0.2.7 -> v1.0.2.7
[01484910][19 00][00] v1.0.8.96 -> v1.0.8.96
[01484943][01 00][05] v1.23.3419 -> v1.23.3419
[01484978][01 01][05] v1.23.3419 -> v1.23.3419
[01485022][08 00][05] v0.12.0.4 -> v0.12.0.4
[01485056]Packet upgrade finish successfully.



[00012481]========== remo-con disconnect. boot(15) ============
[00012515]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x80ce622c].
[00012549]Packet upgrade start...

[00012586]Packet checking...
[00012621]Packet vlink 01.04.0010 <-> 01.03.0020.
[00012653]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012688]Done.

[00012720]Version checking[1]...
[00012778][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012842][03 06][00] v2.3.0.13 -> v2.3.0.13
[00012882][04 00][00] v1.41.0.0 -> v1.41.0.0
[00012967][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013098][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013171][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013246][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013311][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013391][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014387][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014462][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014567][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014626][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014660][01 00][00] v1.23.3419 -> v1.23.3419
[00014693][01 01][00] v1.23.3419 -> v1.23.3419
[00014738][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014771]Packet upgrade cancelled at version checking.



[00014403]========== remo-con disconnect. boot(15) ============
[00014430]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x360e2efd].
[00014463]Packet upgrade start...

[00014497]Packet checking...
[00014527]Packet vlink 01.09.0060 <-> 01.08.0080.
[00014553]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014581]Done.

[00014610]Version checking[1]...
[00014690][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014750][03 06][00] v2.3.0.13 -> v2.4.20.18 need upgrade.
[00014783][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00014890][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00014990][11 01][00] v1.7.0.0 -> v2.0.0.33 need upgrade.
[00015063][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015138][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015230][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015303][12 03][00] v1.10.0.0 -> v1.10.0.0
[00027833][15 00][00] device not detected.
[00027914][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028036][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028089][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028130][01 00][00] v1.23.3419 -> v1.30.5036 need upgrade
[00028162][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00040690][08 00][00] device not detected.
[00040751][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00040777]Done.

[00042803]Waiting for user confirm...
[00052836]Timeout, start upgrade automatically.

[00052901]Firmware upgrading[1]...
[00065497][01 00] Firmware upgrade start...
[00065532][01 00] Firmware upgrade finish failed (step = 2, err = 0xff).
[00095561]Packet upgrade failed at firmware upgrade.



[00014367]========== remo-con disconnect. boot(15) ============
[00014468]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x360e2efd].
[00014498]Packet upgrade start...

[00014533]Packet checking...
[00014561]Packet vlink 01.09.0060 <-> 01.08.0080.
[00014590]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014620]Done.

[00014647]Version checking[1]...
[00027179][03 05][00] device not detected.
[00039711][03 06][00] device not detected.
[00039751][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00052280][11 00][00] device not detected.
[00064809][11 01][00] device not detected.
[00077341][12 00][00] device not detected.
[00089870][12 01][00] device not detected.
[00102412][12 02][00] device not detected.
[00114945][12 03][00] device not detected.
[00127474][15 00][00] device not detected.
[00140006][17 00][00] device not detected.
[00152533][17 01][00] device not detected.
[00152582][19 00][00] v1.0.8.96 -> v1.0.8.96
[00152611][01 00][00] v1.23.3419 -> v1.30.5036 need upgrade
[00152646][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00165175][08 00][00] device not detected.
[00165223][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00165252]Done.

[00167279]Waiting for user confirm...
[00177313]Timeout, start upgrade automatically.

[00177389]Firmware upgrading[1]...
[00050392]========== remo-con disconnect. boot(15) ============
[00050432]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xbaf32d2f].
[00050475]Packet upgrade start...

[00050531]Packet checking...
[00050571]Packet vlink 01.09.0060 <-> 01.08.0080.
[00050615]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00050656]Done.

[00050702]Version checking[1]...
[00050784][03 05][00] v34.2.0.9 -> v34.2.0.9
[00050862][03 06][00] v2.3.0.13 -> v2.4.20.18 need upgrade.
[00050907][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00051028][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00051146][11 01][00] v1.7.0.0 -> v2.0.0.33 need upgrade.
[00051231][12 00][00] v1.10.0.0 -> v1.10.0.0
[00051413][12 01][00] v1.10.0.0 -> v1.10.0.0
[00051519][12 02][00] v1.10.0.0 -> v1.10.0.0
[00051627][12 03][00] v1.10.0.0 -> v1.10.0.0
[00064167][15 00][00] device not detected.
[00064273][17 00][00] v1.1.1.7 -> v1.1.1.7
[00064398][17 01][00] v1.0.2.7 -> v1.0.2.7
[00064463][19 00][00] v1.0.8.96 -> v1.0.8.96
[00064504][01 00][00] v1.23.3419 -> v1.30.5036 need upgrade
[00064551][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00077100][08 00][00] device not detected.
[00077165][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00077210]Done.

[00079252]Waiting for user confirm...
[00089291]Timeout, start upgrade automatically.

[00089370]Firmware upgrading[1]...
[00102419][01 00] Firmware upgrade start...
[00014141][01 00] Firmware upgrade finished successfully.
[00014190]Done.

[00014232]Packet [C:\P3X_FW_V01.09.0060.bin] resumed, card sn [0xbaf32d2f].
[00014283]Packet vlink 01.09.0060 <-> 01.08.0080.
[00014329]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00014369]Version checking[2]...
[00014462][03 05][00] v34.2.0.9 -> v34.2.0.9
[00017041][03 06][00] v2.3.0.13 -> v2.4.20.18 need upgrade.
[00017090][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00017244][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00017361][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.
[00017404][11 01][00] v1.7.0.0 -> v2.0.0.33
[00017496][12 00][00] v1.10.0.0 -> v1.10.0.0
[00017596][12 01][00] v1.10.0.0 -> v1.10.0.0
[00017696][12 02][00] v1.10.0.0 -> v1.10.0.0
[00017796][12 03][00] v1.10.0.0 -> v1.10.0.0
[00030343][15 00][00] device not detected.
[00030432][17 00][00] v1.1.1.7 -> v1.1.1.7
[00030572][17 01][00] v1.0.2.7 -> v1.0.2.7
[00030643][19 00][00] v1.0.8.96 -> v1.0.8.96
[00030689][01 00][05] v1.30.5036 -> v1.30.5036
[00030734][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
[00043277][08 00][00] device not detected.
[00043348][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00043390]Done.

[00043431]Firmware upgrading[2]...
[00043667][01 01] Firmware upgrade start...
[00073946][01 01] Firmware upgrade finished successfully.
[00074001][11 00] Firmware upgrade start...
[00120964][11 00] Firmware upgrade finished successfully.
[00121259][03 06] Firmware upgrade start...
[00480917][03 06] Firmware upgrade finished successfully.
[00480992][09 00] Firmware upgrade start...
[00532870][09 00] Firmware upgrade finished successfully.
[00532949][04 00] Firmware upgrade start...
[00591736][04 00] Firmware upgrade finished successfully.
[00591778]Done.

[00591830]Version checking[3]...
[00591912][03 05][00] v34.2.0.9 -> v34.2.0.9
[00591996][03 06][05] v2.4.20.18 -> v2.4.20.18
[00592048][04 00][05] v1.44.0.0 -> v1.44.0.0
[00592178][11 00][05] v1.8.0.0 -> v1.8.0.0
[00592292][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00592343][11 01][00] v1.8.0.0 -> v2.0.0.33
[00592445][12 00][00] v1.10.0.0 -> v1.10.0.0
[00592552][12 01][00] v1.10.0.0 -> v1.10.0.0
[00592664][12 02][00] v1.10.0.0 -> v1.10.0.0
[00592765][12 03][00] v1.10.0.0 -> v1.10.0.0
[00605310][15 00][00] device not detected.
[00605401][17 00][00] v1.1.1.7 -> v1.1.1.7
[00605543][17 01][00] v1.0.2.7 -> v1.0.2.7
[00605612][19 00][00] v1.0.8.96 -> v1.0.8.96
[00605658][01 00][05] v1.30.5036 -> v1.30.5036
[00605707][01 01][05] v1.30.5036 -> v1.30.5036
[00618254][08 00][00] device not detected.
[00618313][09 00][05] v3.0.0.10 -> v3.0.0.10
[00618364]Packet upgrade failed at version checking.



[00012621]========== remo-con disconnect. boot(15) ============
[00012667]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xbaf32d2f].
[00012710]Packet upgrade start...

[00012759]Packet checking...
[00012803]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012852]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00012896]Done.

[00012942]Version checking[1]...
[00013019][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013098][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013151][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013357][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00013477][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.
[00013524][11 01][00] v1.7.0.0 -> v2.0.0.33
[00013611][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013686][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013766][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013857][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026409][15 00][00] device not detected.
[00026481][17 00][00] v1.1.1.7 -> v1.1.1.7
[00026602][17 01][00] v1.0.2.7 -> v1.0.2.7
[00026667][19 00][00] v1.0.8.96 -> v1.0.8.96
[00026721][01 00][00] v1.30.5036 -> v1.30.5036
[00026764][01 01][00] v1.30.5036 -> v1.30.5036
[00039312][08 00][00] device not detected.
[00039389][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039432]Done.

[00041477]Waiting for user confirm...
[00051522]Timeout, start upgrade automatically.

[00051612]Firmware upgrading[1]...
[00051665][11 00] Firmware upgrade start...
[00100758][11 00] Firmware upgrade finished successfully.
[00100801]Done.

[00100846]Version checking[2]...
[00100924][03 05][00] v34.2.0.9 -> v34.2.0.9
[00101008][03 06][00] v2.4.20.18 -> v2.4.20.18
[00101060][04 00][00] v1.44.0.0 -> v1.44.0.0
[00101184][11 00][05] v1.8.0.0 -> v1.8.0.0
[00101308][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00101356][11 01][00] v1.8.0.0 -> v2.0.0.33
[00101432][12 00][00] v1.10.0.0 -> v1.10.0.0
[00101525][12 01][00] v1.10.0.0 -> v1.10.0.0
[00101612][12 02][00] v1.10.0.0 -> v1.10.0.0
[00101708][12 03][00] v1.10.0.0 -> v1.10.0.0
[00114269][15 00][00] device not detected.
[00114356][17 00][00] v1.1.1.7 -> v1.1.1.7
[00114498][17 01][00] v1.0.2.7 -> v1.0.2.7
[00114554][19 00][00] v1.0.8.96 -> v1.0.8.96
[00114605][01 00][00] v1.30.5036 -> v1.30.5036
[00114650][01 01][00] v1.30.5036 -> v1.30.5036
[00127195][08 00][00] device not detected.
[00127254][09 00][00] v3.0.0.10 -> v3.0.0.10
[00127303]Packet upgrade failed at version checking.



[00014729]========== remo-con disconnect. boot(15) ============
[00014855]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0xbaf32d2f].
[00014900]Packet upgrade start...

[00014950]Packet checking...
[00014996]Packet vlink 01.08.0080 <-> 01.07.0060.
[00015044]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00015090]Done.

[00015140]Version checking[1]...
[00015224][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015322][03 06][00] v2.4.20.18 -> v2.4.14.5
[00015374][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015501][11 00][00] v1.8.0.0 -> v1.7.15.1
[00015589][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015689][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015796][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015895][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028441][15 00][00] device not detected.
[00028550][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028685][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028755][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028807][01 00][00] v1.30.5036 -> v1.30.5036
[00028855][01 01][00] v1.30.5036 -> v1.30.5036
[00041404][08 00][00] device not detected.
[00041477][09 00][00] v3.0.0.10 -> v3.0.0.10
[00041525]Packet upgrade failed at version checking.



[00012850]========== remo-con disconnect. boot(15) ============
[00012893]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xbaf32d2f].
[00012939]Packet upgrade start...

[00012988]Packet checking...
[00013036]Packet vlink 01.09.0060 <-> 01.08.0080.
[00013080]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00013128]Done.

[00013170]Version checking[1]...
[00013258][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013358][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013406][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013558][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013678][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013719][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013827][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013926][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014027][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014132][12 03][00] v1.10.0.0 -> v1.10.0.0
[00026677][15 00][00] device not detected.
[00026867][17 00][00] v1.1.1.7 -> v1.1.1.7
[00027007][17 01][00] v1.0.2.7 -> v1.0.2.7
[00027073][19 00][00] v1.0.8.96 -> v1.0.8.96
[00027120][01 00][00] v1.30.5036 -> v1.30.5036
[00027164][01 01][00] v1.30.5036 -> v1.30.5036
[00039716][08 00][00] device not detected.
[00039796][09 00][00] v3.0.0.10 -> v3.0.0.10
[00039842]Packet upgrade failed at version checking.



[00014823]========== remo-con disconnect. boot(15) ============
[00014867]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xbaf32d2f].
[00014909]Packet upgrade start...

[00014966]Packet checking...
[00015007]Packet vlink 01.09.0060 <-> 01.08.0080.
[00015056]Record vlink 01.04.0010 <-> 01.03.0020 (flow = 0).
[00015098]Done.

[00015148]Version checking[1]...
[00015237][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015314][03 06][00] v2.4.20.18 -> v2.4.20.18
[00015365][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015495][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015617][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015668][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015763][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015862][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015965][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016062][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028605][15 00][00] device not detected.
[00028698][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028818][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028894][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028937][01 00][00] v1.30.5036 -> v1.30.5036
[00028988][01 01][00] v1.30.5036 -> v1.30.5036
[00041533][08 00][00] device not detected.
[00041595][09 00][00] v3.0.0.10 -> v3.0.0.10
[00041640]Packet upgrade failed at version checking.


And the results file:

Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...

========== 2014.01.01 00:00:50 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.09.0060.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.


Any ideas on what I need to do to have a successful upgrade?

Thanks.
2016-6-29
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  253#
sommersports Posted at 2016-6-30 07:43
I'm having trouble upgrading the firmware to 1.09.06 in a new DJI Phantom 3 Professional.  I've trie ...

I'd suggest you to get in touch with our US tech support and send it in for fixing.There is something wrong with the image transmission system. 北美地址.JPG
2016-6-29
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  254#
Hi all,
I've upgraded my p3a firmware from v 1.8.80 to v 1.9.60 (as requested by djigo app), I've inserted sd card in the drone (with RC off), turned it on and it has gone  through all the upgrading process, but in the end I had the solid Red light and a continous bip sound.
Thinking to have failed I've checked in the djigo app and it says that I have v. 1.9.60 installed and that I don't need to upgrade! How is it possible??
I've tried also to redo the procedure but it does nothing and the txt in the sdcard tell me that my firmware match the previous version)
I'm very confused, never happened before
Thx
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  255#
userd59c41b758 Posted at 2016-6-30 17:59
Hi all,
I've upgraded my p3a firmware from v 1.8.80 to v 1.9.60 (as requested by djigo app), I've i ...

Hello userd59c41b758, feel free to post the LOG file as above here. I'll check it.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  256#
Thank you dji paladin I'll post the Log file as soon as I come back to home!
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  257#
userd59c41b758 Posted at 2016-6-30 18:06
Thank you dji paladin I'll post the Log file as soon as I come back to home!

OK. Here are the steps to find it:
For The Windows System:
http://windows.microsoft.com/en- ... den-files=windows-7
For The Mac System:
http://ianlunn.co.uk/articles/qu ... mac-os-x-mavericks/
2.Enter the root directory of the SD card, then find the hidden folder MISC and enter it. There is LOG folder in it.
3.The LOG txt file is under the LOG folder.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  258#
Ok I'll do!
Only one question:I've formatted the card, and put inside again the new firmware to retry the procedure?
Is my Log lost?
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  259#
userd59c41b758 Posted at 2016-6-30 18:42
Ok I'll do!
Only one question:I've formatted the card, and put inside again the new firmware to ret ...

When you try to re-upgrade the drone, if the drone can detect the bin file normally, the LOG will be generated automatically.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  260#
Ok thank you very much DJI-Paladin!
2016-6-30
Use props
DJI-Ken
DJI team
Flight distance : 1515312 ft
  • >>>
+ Add Friend Person Message
United States
Offline

  261#
sommersports Posted at 2016-6-30 07:43
I'm having trouble upgrading the firmware to 1.09.06 in a new DJI Phantom 3 Professional.  I've trie ...

Your video transmission module has been corrupted, call 818-235-0789 at 7am (no waiting) and have it sent in for repair.
Sorry this has happened.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  262#
Hello DJI-Paladin here is my Log File:
[00012148]========== remo-con disconnect. boot(15) ============
[00012305]Packet [C:\P3S_FW_V01.06.0040.bin] detected, card sn [0x2310009a].
[00012345]Packet upgrade start...

[00012399]Packet checking...
[00012442]Packet vlink 01.06.0040 <-> 01.05.0030.
[00012519]Done.

[00012560]Version checking[1]...
[00012629][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012709][03 06][00] v2.4.10.7 -> v2.4.10.7
[00012760][04 00][00] v1.41.0.0 -> v1.41.0.0
[00012869][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00012958][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013050][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013159][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013238][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013280][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013359][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013478][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013537][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013580][01 00][00] v1.22.4095 -> v1.22.4095
[00013620][01 01][00] v1.22.4095 -> v1.22.4095
[00013698][09 00][00] v2.13.0.0 -> v2.13.0.0
[00013739]Done.

[00015782]Waiting for user confirm...
[00025822]Timeout, start upgrade automatically.

[00025904]Firmware upgrading[1]...
[00025966][11 00] Firmware upgrade start...
[00073627][11 00] Firmware upgrade finished successfully.
[00073673]Done.

[00073713]Version checking[2]...
[00073799][03 05][00] v34.2.0.9 -> v34.2.0.9
[00073917][03 06][00] v2.4.10.7 -> v2.4.10.7
[00073968][04 00][00] v1.41.0.0 -> v1.41.0.0
[00074073][11 00][05] v1.7.15.1 -> v1.7.15.1
[00074166][12 00][00] v1.10.0.0 -> v1.10.0.0
[00074242][12 01][00] v1.10.0.0 -> v1.10.0.0
[00074321][12 02][00] v1.10.0.0 -> v1.10.0.0
[00074412][12 03][00] v1.10.0.0 -> v1.10.0.0
[00074457][15 00][00] v1.1.2.0 -> v1.1.2.0
[00074541][17 00][00] v1.1.1.7 -> v1.1.1.7
[00074655][17 01][00] v1.0.2.7 -> v1.0.2.7
[00074721][19 00][00] v255.255.255.254 -> v1.0.8.96
[00074767][01 00][00] v1.22.4095 -> v1.22.4095
[00074810][01 01][00] v1.22.4095 -> v1.22.4095
[00074883][09 00][00] v2.13.0.0 -> v2.13.0.0
[00075028]Packet upgrade finish successfully.



[00012016]========== remo-con disconnect. boot(15) ============
[00012058]Packet [C:\P3S_FW_V01.07.0060.bin] detected, card sn [0x2310009a].
[00012105]Packet upgrade start...

[00012150]Packet checking...
[00012194]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012242]Record vlink 01.06.0040 <-> 01.05.0030 (flow = 0).
[00012281]Done.

[00012324]Version checking[1]...
[00012393][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012479][03 06][00] v2.4.10.7 -> v2.4.13.0 need upgrade.
[00012528][04 00][00] v1.41.0.0 -> v1.41.0.0
[00012652][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012745][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012832][12 01][00] v1.10.0.0 -> v1.10.0.0
[00012932][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013033][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013076][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013162][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013282][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013338][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013385][01 00][00] v1.22.4095 -> v1.23.4920 need upgrade
[00013426][01 01][00] v1.22.4095 -> v1.23.4920 need upgrade
[00013478][09 00][00] v2.13.0.0 -> v2.13.0.0
[00013526]Done.

[00015568]Waiting for user confirm...
[00025616]Timeout, start upgrade automatically.

[00025705]Firmware upgrading[1]...
[00040477][01 00] Firmware upgrade start...
[00011732][01 00] Firmware upgrade finished successfully.
[00011788]Done.

[00011830]Packet [C:\P3S_FW_V01.07.0060.bin] resumed, card sn [0x2310009a].
[00011900]Packet vlink 01.07.0060 <-> 01.06.0040.
[00011951]Record vlink 01.06.0040 <-> 01.05.0030 (flow = 0).
[00011992]Version checking[2]...
[00012065][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012150][03 06][00] v2.4.10.7 -> v2.4.13.0 need upgrade.
[00012203][04 00][00] v1.41.0.0 -> v1.41.0.0
[00012326][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012414][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012514][12 01][00] v1.10.0.0 -> v1.10.0.0
[00012614][12 02][00] v1.10.0.0 -> v1.10.0.0
[00012865][12 03][00] v1.10.0.0 -> v1.10.0.0
[00017443][15 00][00] v1.1.2.0 -> v1.1.2.0
[00017535][17 00][00] v1.1.1.7 -> v1.1.1.7
[00017654][17 01][00] v1.0.2.7 -> v1.0.2.7
[00017710][19 00][00] v255.255.255.254 -> v1.0.8.96
[00017756][01 00][05] v1.23.4920 -> v1.23.4920
[00017806][01 01][00] v1.22.4095 -> v1.23.4920 need upgrade
[00017870][09 00][00] v2.13.0.0 -> v2.13.0.0
[00017914]Done.

[00017960]Firmware upgrading[2]...
[00018127][01 01] Firmware upgrade start...
[00048491][01 01] Firmware upgrade finished successfully.
[00048787][03 06] Firmware upgrade start...
[00360347][03 06] Firmware upgrade finished successfully.
[00360393]Done.

[00360437]Version checking[3]...
[00360531][03 05][00] v34.2.0.9 -> v34.2.0.9
[00360616][03 06][05] v2.4.13.0 -> v2.4.13.0
[00360667][04 00][00] v1.41.0.0 -> v1.41.0.0
[00360790][11 00][00] v1.7.15.1 -> v1.7.15.1
[00360878][12 00][00] v1.10.0.0 -> v1.10.0.0
[00360978][12 01][00] v1.10.0.0 -> v1.10.0.0
[00361078][12 02][00] v1.10.0.0 -> v1.10.0.0
[00361179][12 03][00] v1.10.0.0 -> v1.10.0.0
[00361226][15 00][00] v1.1.2.0 -> v1.1.2.0
[00361317][17 00][00] v1.1.1.7 -> v1.1.1.7
[00361457][17 01][00] v1.0.2.7 -> v1.0.2.7
[00361508][19 00][00] v255.255.255.254 -> v1.0.8.96
[00361558][01 00][05] v1.23.4920 -> v1.23.4920
[00361601][01 01][05] v1.23.4920 -> v1.23.4920
[00361667][09 00][00] v2.13.0.0 -> v2.13.0.0
[00361712]Packet upgrade finish successfully.



[00012372]========== remo-con disconnect. boot(15) ============
[00012413]Packet [C:\P3S_FW_V01.08.0080.bin] detected, card sn [0x2310009a].
[00012454]Packet upgrade start...

[00012499]Packet checking...
[00012551]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012591]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00012634]Done.

[00012678]Version checking[1]...
[00012761][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012841][03 06][00] v2.4.13.0 -> v2.4.14.5 need upgrade.
[00012887][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00013000][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013209][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013311][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013409][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013509][12 03][00] v1.10.0.0 -> v1.10.0.0
[00018057][15 00][00] v1.1.2.0 -> v1.1.2.0
[00018131][17 00][00] v1.1.1.7 -> v1.1.1.7
[00018250][17 01][00] v1.0.2.7 -> v1.0.2.7
[00018315][19 00][00] v255.255.255.254 -> v1.0.8.96
[00018360][01 00][00] v1.23.4920 -> v1.23.4920
[00018400][01 01][00] v1.23.4920 -> v1.23.4920
[00018475][09 00][00] v2.13.0.0 -> v3.0.0.10 need upgrade.
[00018517]Done.

[00020562]Waiting for user confirm...
[00030600]Timeout, start upgrade automatically.

[00030683]Firmware upgrading[1]...
[00030954][03 06] Firmware upgrade start...
[00336179][03 06] Firmware upgrade finished successfully.
[00336254][09 00] Firmware upgrade start...
[00389683][09 00] Firmware upgrade finished successfully.
[00389760][04 00] Firmware upgrade start...
[00449161][04 00] Firmware upgrade finished successfully.
[00449227]Done.

[00449277]Version checking[2]...
[00449364][03 05][00] v34.2.0.9 -> v34.2.0.9
[00449446][03 06][05] v2.4.14.5 -> v2.4.14.5
[00449495][04 00][05] v1.44.0.0 -> v1.44.0.0
[00449625][11 00][00] v1.7.15.1 -> v1.7.15.1
[00449750][12 00][00] v1.10.0.0 -> v1.10.0.0
[00449853][12 01][00] v1.10.0.0 -> v1.10.0.0
[00449959][12 02][00] v1.10.0.0 -> v1.10.0.0
[00450058][12 03][00] v1.10.0.0 -> v1.10.0.0
[00450108][15 00][00] v1.1.2.0 -> v1.1.2.0
[00450233][17 00][00] v1.1.1.7 -> v1.1.1.7
[00450414][17 01][00] v1.0.2.7 -> v1.0.2.7
[00450478][19 00][00] v255.255.255.254 -> v1.0.8.96
[00450520][01 00][00] v1.23.4920 -> v1.23.4920
[00450570][01 01][00] v1.23.4920 -> v1.23.4920
[00450639][09 00][05] v3.0.0.10 -> v3.0.0.10
[00450682]Packet upgrade finish successfully.



[00012229]========== remo-con disconnect. boot(15) ============
[00012278]Packet [C:\P3S_FW_V01.09.0060.bin] detected, card sn [0x2310009a].
[00012322]Packet upgrade start...

[00012374]Packet checking...
[00012541]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012594]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012643]Done.

[00012688]Version checking[1]...
[00012786][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012885][03 06][00] v2.4.14.5 -> v2.4.20.18 need upgrade.
[00012944][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013085][11 00][00] v1.7.15.1 -> v1.8.0.0 need upgrade.
[00013224][11 01][00] v1.7.15.1 -> v2.0.0.33, firmware v1.7.15.1 not support.
[00013269][11 01][00] v1.7.15.1 -> v2.0.0.33
[00013395][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013498][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013625][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013733][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013783][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013888][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014034][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014104][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014164][01 00][00] v1.23.4920 -> v1.23.4920
[00014209][01 01][00] v1.23.4920 -> v1.23.4920
[00014274][09 00][00] v3.0.0.10 -> v3.0.0.10
[00014355]Done.

[00016402]Waiting for user confirm...
[00026448]Timeout, start upgrade automatically.

[00026547]Firmware upgrading[1]...
[00026604][11 00] Firmware upgrade start...
[00073684][11 00] Firmware upgrade finished successfully.
[00074002][03 06] Firmware upgrade start...
[00421808][03 06] Firmware upgrade finished successfully.
[00421890]Done.

[00421935]Version checking[2]...
[00422025][03 05][00] v34.2.0.9 -> v34.2.0.9
[00422105][03 06][05] v2.4.20.18 -> v2.4.20.18
[00422188][04 00][00] v1.44.0.0 -> v1.44.0.0
[00422326][11 00][05] v1.8.0.0 -> v1.8.0.0
[00422450][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00422497][11 01][00] v1.8.0.0 -> v2.0.0.33
[00422598][12 00][00] v1.10.0.0 -> v1.10.0.0
[00422698][12 01][00] v1.10.0.0 -> v1.10.0.0
[00422830][12 02][00] v1.10.0.0 -> v1.10.0.0
[00422939][12 03][00] v1.10.0.0 -> v1.10.0.0
[00455499][15 00][00] device not detected.
[00455599][17 00][00] v1.1.1.7 -> v1.1.1.7
[00455880][17 01][00] v1.0.2.7 -> v1.0.2.7
[00455965][19 00][00] v255.255.255.254 -> v1.0.8.96
[00456015][01 00][00] v1.23.4920 -> v1.23.4920
[00456063][01 01][00] v1.23.4920 -> v1.23.4920
[00456147][09 00][00] v3.0.0.10 -> v3.0.0.10
[00456195]Packet upgrade failed at version checking.



[00012331]========== remo-con disconnect. boot(15) ============
[00012381]Packet [C:\P3S_FW_V01.09.0060.bin] detected, card sn [0x2310009a].
[00012436]Packet upgrade start...

[00012489]Packet checking...
[00012564]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012615]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012665]Done.

[00012713]Version checking[1]...
[00012813][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012912][03 06][00] v2.4.20.18 -> v2.4.20.18
[00012971][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013092][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013232][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013280][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013381][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013515][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013631][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013720][12 03][00] v1.10.0.0 -> v1.10.0.0
[00018271][15 00][00] v1.1.2.0 -> v1.1.2.0
[00018360][17 00][00] v1.1.1.7 -> v1.1.1.7
[00018510][17 01][00] v1.0.2.7 -> v1.0.2.7
[00018590][19 00][00] v255.255.255.254 -> v1.0.8.96
[00018638][01 00][00] v1.23.4920 -> v1.23.4920
[00018689][01 01][00] v1.23.4920 -> v1.23.4920
[00018772][09 00][00] v3.0.0.10 -> v3.0.0.10
[00018842]Packet upgrade cancelled at version checking.



[00012348]========== remo-con disconnect. boot(15) ============
[00012400]Packet [C:\P3S_FW_V01.09.0060.bin] detected, card sn [0x2310009a].
[00012442]Packet upgrade start...

[00012493]Packet checking...
[00012540]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012594]Record vlink 01.09.0060 <-> 01.08.0080 (flow = 0).
[00012641]Done.

[00012687]Version checking[1]...
[00012778][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012869][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013064][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013196][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013337][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013388][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013489][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013597][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013706][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013805][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013868][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013967][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014100][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014176][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014225][01 00][00] v1.23.4920 -> v1.23.4920
[00014273][01 01][00] v1.23.4920 -> v1.23.4920
[00014335][09 00][00] v3.0.0.10 -> v3.0.0.10
[00014379]Packet upgrade cancelled at version checking.



[00012047]========== remo-con disconnect. boot(15) ============
[00012099]Packet [C:\P3S_FW_V01.09.0060.bin] detected, card sn [0x2310009a].
[00012149]Packet upgrade start...

[00012206]Packet checking...
[00012255]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012310]Record vlink 01.09.0060 <-> 01.08.0080 (flow = 0).
[00012357]Done.

[00012402]Version checking[1]...
[00012490][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012591][03 06][00] v2.4.20.18 -> v2.4.20.18
[00012644][04 00][00] v1.44.0.0 -> v1.44.0.0
[00012770][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013051][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013097][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013203][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013280][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013360][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013450][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013513][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013598][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013718][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013799][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013843][01 00][00] v1.23.4920 -> v1.23.4920
[00013895][01 01][00] v1.23.4920 -> v1.23.4920
[00013979][09 00][00] v3.0.0.10 -> v3.0.0.10
[00014147]Packet upgrade cancelled at version checking.



Is it ok or I need to downgrade and re-upgrade to 1.9.60?
thank you very much
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  263#
And here is my "P3S_FW_RESULT_AB.TXT":

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
2016-6-30
Use props
fbin14
New

+ Add Friend Person Message
United States
Offline

  264#
dkingfield@aol. Posted at 2016-6-14 17:49
Just received Phantom 3 Pro Sat, and updated to the 1.9.60 firmware. RC controller indicated that fi ...

I have a P3Pro, / DJIGO app v2.8.3 / Aircraft v1.9.60 /  RC v1.1.8
Error on iPad DJIGO, needing to update RC. I attempted 3x, no positive results
I thought we were be able to renew RC firmware via wifi?,  no option in my DJIGO app v2.8.3
How do I correct the problem now or Remove the error in DJIGO app?
2016-6-30
Use props
  265#
I have a P3Pro, app 2.8.3/aircraft 1.9.60/RC 1.1.8
My RC is requiring fw upgrade, I tried three times no success?
Also, I thought the app allows wifi upgrade for RC upgrades?
Can you advise a plan fwd to reset my errors in the app.
Thx, KBoose
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  266#
fbin14@gmail.co Posted at 2016-7-1 11:53
I have a P3Pro, app 2.8.3/aircraft 1.9.60/RC 1.1.8
My RC is requiring fw upgrade, I tried three time ...

Since your rc is running the 1.18 firmware, please try to upgrade the 1.3.2 firmware with a usb drive. When it finished successfully, then try to upgrade the RC again via DJI GO app.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  267#
Please DJI-Paladin could you please tell me if the Log that I copied few posts above is ok? Thank you very much
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  268#
userd59c41b758 Posted at 2016-7-1 14:05
Please DJI-Paladin could you please tell me if the Log that I copied few posts above is ok? Thank yo ...

The LOG is normal.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  269#
Thank you very much sir, even if it say that the upgrading process failed?
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  270#
userd59c41b758 Posted at 2016-7-1 14:50
Thank you very much sir, even if it say that the upgrading process failed?

The last record says "Abort" which means your drone's firmware version is the same as the bin file's. You can also check the drone's function after update.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  271#
Sorry but if everything is ok why I've got this? ========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again

Thank you and sorry if I insist, but I am scared to do some mistake
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  272#
userd59c41b758 Posted at 2016-7-1 15:12
Sorry but if everything is ok why I've got this? ========== 2014.01.01 00:00:13 remo-con disconnect= ...

捕获.JPG
There are 3 “Abort” results after that “Failed”. If there is something wrong, it will keep failing. So now it would be better to check the drone functions to see.
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  273#
Ok thank you very much, btw is there a way to reinstall the firmware bypassing the checking version?
2016-6-30
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  274#
userd59c41b758 Posted at 2016-7-1 15:35
Ok thank you very much, btw is there a way to reinstall the firmware bypassing the checking version? ...

Sorry, could you make it clearly?
2016-6-30
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  275#
Sorry I mean that if I try to Re-upgrade the firmware inserting the .bin in the sd card and and power On the Phantom, I get "abort because the firmware version is the same or older" how can I reinstall the firmware please?
2016-7-1
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  276#
userd59c41b758 Posted at 2016-7-1 16:11
Sorry I mean that if I try to Re-upgrade the firmware inserting the .bin in the sd card and and powe ...

If the last update is failed, the drone will try to re-upgrade it with the bin file.But if there is nothing wrong at the last time, it won't try to refresh it.
2016-7-1
Use props
userd59c41b758
lvl.4
Flight distance : 1385702 ft
+ Add Friend Person Message
Italy
Offline

  277#
But the problem is that the first attempt failed and gave me that error, but now (without ever getting the "success" of the upgrade) it fail to upgrade because it Says that I already have the latest version (but how is it possible if I never successfully upgraded??)
2016-7-1
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  278#
userd59c41b758 Posted at 2016-7-1 16:56
But the problem is that the first attempt failed and gave me that error, but now (without ever getti ...

So we only need to keep our eyes on the latest one.
2016-7-1
Use props
jowivalencia
New

+ Add Friend Person Message
Switzerland
Offline

  279#
Buenas tardes.
Tengo un problema de calibracion del IMU. En el momento que empieza el proceso de calibracion, al llegar al 2% se detiene y aparece un mensaje de "Error desconocido" (Unknown error)
Por otro lado, el dronne hace bips desde el momento en que lo enciendo: DD----- DD----- DD-----
Gracias por su ayuda!!

App 2.8.1
Version 1.9.60
Remote controller 1.6.0
2016-7-1
Use props
DJI-Ken
DJI team
Flight distance : 1515312 ft
  • >>>
+ Add Friend Person Message
Offline

  280#
jowivalencia Posted at 2016-7-1 21:52
Buenas tardes.
Tengo un problema de calibracion del IMU. En el momento que empieza el proceso de cal ...

Did this start after you attempted a firmware update?
If so, did the firmware update fine then you went to do a IMU calibration and now getting the errors?
Power cycle the aircraft a few times and if you still get IMU errors then you may need to send the aircraft in for repair.
You can also try reinstalling the firmware, but I'm guessing that's not the problem as you attempted a IMU calibration so that tells me that everything went ok if you did a firmware update.
2016-7-1
Use props
1 ...234567891011... 12879Next >
Advanced
Bold Text Color
Upload
Picture Add Link Emoticon
You need to log in before you can reply Login | Register now

Credit Rules