jp
New
Canada
Offline
|
Hi guys
I have a problem with getting transmission data to my device and if someone may happen to know the solution, any suggestions would be greatly appreciated!
My air system is as follows:
s900, Lighbridge 2, z15 gimbal with GH3 camera attached, A2 controller.
Just a side note, I have yet to bring it up in the air yet as I am having this transmission data problem.
A2 connected to A2 assistant software and everything updated successfully. Channels also mapped and functioning.
Zenmuse assistant also connected successfully and all firmware up to date.
the problem:
1. When powered, the gimbal just spins around in a circle and does not stop. I have a feeling re-calibrating the gimbal may solve this problem and if someone knows how to do this please let me know.
2. LB2 connects successfully but there is no transmission data whatsoever. Screen is black and says "no transmission data" at the top (camera is on, s900 is powered on), and there is no data even on the battery info, ect. at the top of the screen.
Gimbal light is a solid green when powered on, and turns solid yellow when camera turns on.
Lightbridge 'Control' light is green but 'video' is red.
Attached is a link with a few short videos and pics showing the described problem:
https://www.dropbox.com/sh/u1l18 ... 0elSzkOjmVbEfa?dl=0
If anyone may know what the problem is, please comment
Thank you
|
|