Gary Mac
lvl.4
Flight distance : 829885 ft
United States
Offline
|
Please read: For those who don't have time to dig through the thread, perform the following for the 12/26 Firmware Update...
- There is a new DJI Assistant 2 (12/15). Upgrade to it!
- DJI Go 4 has been stalling at 73%. It appears too o the update, but then stalls and eventually says it fails. Mess with it if you like, but best advice is to use DJI Assistant 2 (newest version)
- Plug Mavic into Computer and run DJI Assistant 2 (NEWEST version) and update firmware.
- After auto-reboot of Mavic and verification of firmware, turn off Mavic
- Remove battery and replace with any spare batteries.
- Repeat process until ALL batteries have been upgraded. Battery upgrade takes about 3 minutes.
- Unplug Mavic and plug in RC.
- Power up RC and upgrade firmware in DJI Assistant 2
- After software verification, power down RC and unplug
- Plug in Phone, power up RC, DJI Go 4 and Mavic to confirm everything is happy
I had 5 batteries and it took me about 45 minutes to get everything updated. Seems happy now.
Hope this helps!
Gary |
|