Donnie *
First Officer
Flight distance : 3636782 ft
United States
Offline
|
If you are having trouble still Ricardo , try this .
First I assume you are up to date OR at the least on compatible FW and you are using approved go app devices .
Ok here is a way to solve this . I assume you are up to date on the AC the RC and the Go app.
Be sure before starting that you are NOT logged into the DJI servers on ANY DEVICE. Then fire up your system in this order .
First the RC transmitter, (***go app device can be on but DONT OPEN THE APP.)
Next fire up the Aircraft .
At this point make sure entire system is ON and in the "standby mode", ( STANDBY MODE = so if you engaged the motors you would take off.) What you want is all systems on AND ALSO have the go app device connected to the wi-fi , internet connection as well )
Now open the go app and be sure to sign in using your user name and password, also after signaing in sync your flight records at this time as it will insure that you are connected to dji servers. Now once you do this . Turn everything off and re- boot same as above procedure but dont need to sign in this time to the DJI Page.
***when doing this procedure be sure that you have a solid wi fi connection to the Go app device , you can do this indoors if you wish as you are NOT actually going to engage the props, you are going to do all the steps so the system on standby but NOT fire up the props .
This should work and eliminate the range limitation issue . This was implemented to prevent pilots from flying out of their line of sight without having the go app device attached and turned on so the pilot can see the aircraft camera and flight data .
donnie
|
|