fans34ff7859
New
Flight distance : 954390 ft
United States
Offline
|
Hardware details :
Inspire 1 ver 1 with Zenmuse X5
AC firmware WM610_FW_V01.07.00.90
The Controller firmware exisiting ver 1.7.80 could not be rollback to 1.5.80 using the DJI Go App.
RC firmware upgraded 1.5.80 to 1.7.80 using DJI go App 3.1.22(iOS)
RC firmware rollback to 1.6 using dji go app showed success but RC still show 1.7. Tried like 8 times.
After 4 button reset on controller , Dji go app cannot show rollback firmwares.
Tried By long pressing the Graduation hat icon. the previous old versions were missing.
Tried using formated fat32 thumbdrive / SD card reader ,
Tried 3 buttons , 4 buttons reset , no sound change or blue light except for re-linking works though.
RC firmware upgraded 1.5.80 to 1.7.80 using DJI go App 3.1.22(iOS)
RC firmware rollback to 1.6 using dji go app showed success but RC still show 1.7. Tried like 8 times.
After 4 button reset on controller , Dji go app cannot show rollback firmwares.
Used PC to format thumb drive & copied .bin files .Tried one firmware at a time,
tried various .bin files : C1_FW_V01.05.0080 , C1_FW_V01.06.0000, RC_FW_V1.5.80 , C1_FW_V01.02.0021 , gs_ofdm.bin , WM610_FW_V01.06.00.40
Tried Using Dji go app 2.8.3 on Android & Using Dji go app 3.1.22 on Ipad Air 2 . Both failed to rollback RC firmware to 1.5.80
After trying with C1_FW_V01.06.0000 on thumb drive got a result below.
Result: Aborted The firmware on the SD card is identical to or older than the current firmware on the remote controller.
After trying C1_FW_V01.05.0080 : Result below :
Aborted . The current firmware does not support downgrade. Use a different version of firmware to downgrade the target version.
tried opening up the case . jumped the Reset & Grd pins connectors on the PDB . there was a beep but it didn't worked.
Contacted DJI support, Result : firmware rollback is not an option with the current latest firmware and kinda giving me no choice but to upgrade aircraft and camera to suit the contoller version of 1.7.80. Or else COntroller cannot work because of the firmware version difference between Controller & Aircraft.
At this moment the slave controller is the master. but still cannot pair the new slave because of firmware diffefence. new slave cannot locate new master controller but new slave can see video feed .
Anyone has a solution ?
|
|