Does the Phantom 4 Pro Plus RC work with the Phantom 4 Pro V2?

No. You must use the GL300K remote controller with the P4P V2.

https://store.dji.com/product/ph ... 2-remote-controller

msinger Posted at 1-30 20:03
No. You must use the GL300K remote controller with the P4P V2.

https://store.dji.com/product/ph ... 2-remote-controller

Thanks....I was just about to pull the trigger on a used model.

Hi There, thanks for reaching out. As mentioned on post #2, it is not compatible with your Phantom 4 Pro v2.0. The Phantom 4 Pro V2.0 is compatible with two remote controller types: the standard version and the built-in screen version (GL300K: with built-in display device), (GL 300L: without a display device). Both can switch between 2.4GHz and 5.8GHz frequency bands with a maximum controllable range of 4.3mi (7km) (unobstructed, free of interference, FCC compliant), and both can focus by half-pressing the shutter release button. If you need further assistance, please feel free to contact us. Thanks for your support.

S'il vous plait jai un phantom 4 pro plus v2.0 avec ecran integré et je suis un amateur de photogrametrie.
A ma grande surprise je ne peux pas Faire de photogrammetrie Avec.
Avez vous une solution pour moi?

msinger Posted at 2019-1-30 20:03
No. You must use the GL300K remote controller with the P4P V2.

https://store.dji.com/product/ph ... 2-remote-controller

Or you can use Dji Smart Controller.

Is the RC PLUS compatible with M300 RTK ?