Hello, the RS 2 is a nice unit, works perfect  - but can't use Raveneye  because to connect need wifi password. Anybody know this password? It's not in the manual or anywhere. Thanks

The default password is usually 12345678.

The password for the Raveneye WiFi network is printed on the Raveneye unit, in print way too small for older eyes to read.

It is not one of the standard default passwords; it appears to be unique to each unit.

InterMurph Posted at 10-18 04:58
The password for the Raveneye WiFi network is printed on the Raveneye unit, in print way too small for older eyes to read.

It is not one of the standard default passwords; it appears to be unique to each unit.

I just read that and was coming back to correct myself.

Well, I think we are both right.

When you connect your phone to the Raveneye's WiFi, you have to use the unique password that appears on the Raveneye unit.

But when you connect the app to the Raveneye, you need to give the 12345678 password.

I have been using DJI products for 5 or 6 years now, and stuff like this is _still_ happening, and _still_ so annoying.

Hi Andy, the initial password of Raveneye can be found on the SSID sticker.

Can anybody help me understand what is in between the M 5. Of my password? Image should be attached

djiuser_4yRc7TW4sspW Posted at 10-31 06:12
Can anybody help me understand what is in between the M 5. Of my password? Image should be attached

Ok I figured it out.

I'm not getting this to work. I can connect to either the gimbal on startup OR raveneye, but once it connects to raveneye, nothing from the app controls the gimbal. No activetrack or other functions work. Please tell me this isn't an Android thing.

The app asks me for the Raveneye password every time I connect. Shouldn't it remember it?

Help. There is no password listed below my RavenEye SSID number so I can’t use it.

fans642c0950 Posted at 3-24 17:09
Help. There is no password listed below my RavenEye SSID number so I can’t use it.

if no password is printed, then it is 12345678

I just got the Raveneye and there is no password on the SSDI sticker and 12345678 is not working either. I tried abcdefgh, ABCDEFGH, RAVENEYE, Raveneye, RavenEye ect and it stills says wrong password.

DJI Mindy Posted at 2020-10-19 03:19
Hi Andy, the initial password of Raveneye can be found on the SSID sticker.

I just got the Raveneye and there is no password on the SSDI sticker and 12345678 is not working either. I tried abcdefgh, ABCDEFGH, RAVENEYE, Raveneye, RavenEye ect and it stills says wrong password.

Sky Lakes Media Posted at 4-5 20:14
I just got the Raveneye and there is no password on the SSDI sticker and 12345678 is not working either. I tried abcdefgh, ABCDEFGH, RAVENEYE, Raveneye, RavenEye ect and it stills says wrong password.

I have the same issue, the password is not printed on the sticker. On the sticker there is only the wifi SSID and 12345678 doesn't work.

Sky Lakes Media Posted at 4-5 20:14
I just got the Raveneye and there is no password on the SSDI sticker and 12345678 is not working either. I tried abcdefgh, ABCDEFGH, RAVENEYE, Raveneye, RavenEye ect and it stills says wrong password.

I have the same issue, the password is not printed on the sticker. On the sticker there is only the wifi SSID and 12345678 doesn't work.

Hi friends. Greetings from Turkey.
The solution is as follows.
Forget the network from the phone if you have already connected. Close the dji app on the phone. Grant all app permissions. Turn off app restrictions.

1. Turn on the device and press the power button 6 times. Reset.
2. See and connect the device via wifi. will be connected without a password.
3. Enter the DJI app. Connect to Ravene.
4. It will ask for password. Now set a password yourself.
This place is important. 1 uppercase letter in the password. There should be 1 lowercase letter and number. 8 characters in total. (Example password: Abcd1234)
. You can now log in with the password you set.
Knowledge increases as it is shared ;) Good luck.

Hay Guys!

I am having the wifi password issue. Been looking for the last 2 hours trying to figure this out.

• I have tried the '12345678' password, no luck
• I have tried to reset by turning the raven eye on and then pressing the power button 6 times... nothing happens
  

What Next? Any Ideas!??!?!?

Thanks

I have the same problem but the strange thing is that i can connect direct to the Ronin app on my mobilphone and not on the Ronin app on my Samsung Tablet. The version on my mobile is 1.4.8 and on my tablet is version 1.4.10 I think there is a problem with the latest upgrade.

Absolutely ridiculous that DJI is not fixing this...

- 12345678 does not work
- sticker on unit only has wifi SSID name, no password below like on certain units
- resetting the unit by pressing power button 6 times does not work
- updated Ronin firmware and lastest Ronin app update

Raveneye does not work

Hello from Russia, friends.  i faced the same problem, i couldn't connect to my ravenye , no password matched.  i was helped by the advice that was indicated above - restarting the device with 6 button presses.

BUT

it didn't work on the first try.  i did several on and off and several reboot attempts. and only about 3 times i managed to reset the password and after that successfully connect like the first time.  so this tactic really works, try it a few times.  good luck to all!

fans642c0950 Posted at 2021-3-24 17:09
Help. There is no password listed below my RavenEye SSID number so I can’t use it.

Same this is annoying

fansa0c27b3b Posted at 2021-8-18 11:00
I have the same issue, the password is not printed on the sticker. On the sticker there is only the wifi SSID and 12345678 doesn't work.

Me too i didn’t find the password in the sticker and 12345678 not working

raveneye aa70ec forgot password

fans007c22c1 Posted at 3-19 23:08
raveneye aa70ec forgot password

Hi there. You can try pressing the power button six times to reset. After reset, the Wi-Fi password is “12345678”. Then you have to change the Wi-Fi password to a stronger one on the Ronin app after resetting it. Have a nice day.