tester01
lvl.1
Germany
Offline
|
Hallo, same here:
---------------------------------------------------------------------------------------
Test the new Go-App 2.0.0 for Android on Phantom 3 Pro, FW 1.3.20.
After installation I've got problems until the Go App finally ran.
After that I've got no App crash during test ... so far so good!
Problem with the CPU load is not eliminated.
The Go App starts the process "com.google.process.gapps" (same as Pilot-App)
A CPU load between 50-80% ended up to the already known temperature problems ...
on Asus Momo Pad 8: In case of switching to the map I lost live-viewing (Pilot App 1.1.0 was OK)
On Lenovo Life Tab: During the test no abnormalities detected (except the CPU load)
Waited so long for the new Andriod Go-App ... and then missing the big breakthrough!
---------------------------------------------------------------------------------------
Test the Go-App 2.0.1 from Android App Store.
Clean and Stop Go App 2.0.0, delete Folder, make a Complete new Installation.
On Asus Momo Pad8: Still lost live view if I'm switching to the Map.
I've had about two App crashes while an 15min flight.
On Lenovo Life Tab - I've had two crashes while starting the App.
I've had three App crashes while a 20min flight.
The Go App 2.0.1 still starts "com.google.process.gapps" and CPU load is between 50-80%
The App has become even more unstable
---------------------------------------------------------------------------------------
Test the Go-App 2.0.2 from Android App Store.
On Asus Momo Pad8: Still lost live view if I switch to Map.
On Lenovo Life Tab - I had about 100% crash rate when I start the Go App 2.0.2.
The App is not useable.
I do not want to be rude but this can not be true, ... an App nightmare!!!
---------------------------------------------------------------------------------------
My App Summary:
Pilot App 1.0.7 & 1.1.0 - worked for me (some minor bugs and the CPU load/Temperature issue)
Pilot App 1.2.0 - more unstable (some problems with App-Crash, CPU load/Temperature, local Video-Cache,...")
Go-App 2.0.0 - worked for me (some problems and CPU load issue).
Go-App 2.0.1 - unstabel (more App-crashes)
Go-App 2.0.2 - not usable (crash, crash, crash)
Regards |
|