Hello,

There is no -HorizonSteady- on my Avata 2 available.
In non of both -EIS- menus!
Only -RockSteady- or -off- appears.
On all devices is the actual firmware installed (goggles 3, fpv controller 3 and on the drone itself)

- Ive tested all video modes. Especially lower fps-settings.
- I switched from video to photo mode and back
- I switched from m-log to normal

No luck...

I have tried to reinstall the firmware via DJI Assistant 2 (DJI FPV series).
But the assistant doesnt recognizes any of my devices. I think thats a driver problem on win 10.
I tested all solutions, but none of them working.

Is there something i overlook?

Thank folks

Hello,

There is no -HorizonSteady- on my Avata 2 available.
In non of both -EIS- menus!
Only -RockSteady- or -off- appears.
On all devices is the actual firmware installed (goggles 3, fpv controller 3 and on the drone itself)

- Ive tested all video modes. Especially lower fps-settings.
- I switched from video to photo mode and back
- I switched from m-log to normal

No luck...

I have tried to reinstall the firmware via DJI Assistant 2 (DJI FPV series).
But the assistant doesnt recognizes any of my devices. I think thats a driver problem on win 10.
I tested all solutions, but none of them working.

Is there something i overlook?

Thank folks

Horizonsteady is only available in one of the modes.  I believe the camera has to be set to either Wide or Normal mode (can't recall which)?  It isn't available in Ultra Wide mode.

Thanks Dirty Bird,

I use wide mode, so ive to test normal and ultra wide.

AlSo-Fotografie Posted at 4-21 05:13
Thanks Dirty Bird,

I use wide mode, so ive to test normal and ultra wide.

Now that I think about it maybe it does have to be in Ultra Wide mode, to give some room for cropping down?

Hi there. Thank you for reaching out and we do apologize for the trouble. Please try to download the correct version of the DJI Assistant 2 software then update/refresh the firmware of all the components and check if the issue persists. You may download the software using the link below. Please keep us posted.

https://www.dji.com/global/downl ... sumer-drones-series

DJI Paladin Posted at 4-22 03:51
Hi there. Thank you for reaching out and we do apologize for the trouble. Please try to download the correct version of the DJI Assistant 2 software then update/refresh the firmware of all the components and check if the issue persists. You may download the software using the link below. Please keep us posted.

https://www.dji.com/global/downloads/softwares/dji-assistant-2-consumer-drones-series

Hello Paladin,

thanks for your response!
I was pretty sure i used the correct version
Thanks for the correction

AlSo-Fotografie Posted at 4-22 07:25
Hello Paladin,

thanks for your response!

You are most welcome. Please note that the DJI Avata 2, DJI Goggles 3, and DJI FPV Controller 3 only work with the DJI Assistant 2 consumer drone series. Please update us with the result of the troubleshooting. Thank you for your cooperation.

AlSo-Fotografie Posted at 4-21 03:55
Hello,

There is no -HorizonSteady- on my Avata 2 available.

hi you need to set the aspect ratio to 16:9 and after the horizontal will appear

fans77066077 Posted at 4-27 04:04
hi you need to set the aspect ratio to 16:9 and after the horizontal will appear

Perfect, thank you. Thats the trick