Jase Teo
lvl.1
Singapore
Offline
|
Hello… I'm back! After emailing the guy who did the mod on the USB data cable, I found a solution!
As the online youtube tutorial indicates…
- To cut the black wire
My own mod was to add a ON/OFF switch between the 2 ends of the cut black wire. Although I did not try it on the RED +5v wire, the guy who did tis has told me he tried all but the Black one works.
How it works, u turn ON (connect) the switch. This would be the same as normal operation of the USB cable.
Once the phone indicated it was in the charging process, u will invoke the DJI apps. Once everythg seems working. U turn OFF the switch (disconnect the power) . The phone will not be charge but the program will still run smoothly.
Wat I reckon was the phone has to be "tricked" into knowing the controller was connected and then the program will start delivering data across the data cables to & fro. Once connection is established. Even then u switch off the power line to the power, the data will still be streaming.
Things to note, the data cable u used must be a good quality type. Preferably original data cable from the phone manufacturer. As other OEM manufacturers might not do a good job on the internal connection of the cable.
2nd most important thgs to note is that u MUST make sure there is nothing connected to the original Micro-USB socket on the top left side of the controller. Else it will not work.
I hope my tips works on ur own mod. I will do a field test soon to see how well it fair. |
-
|