Someone explain to me why UNLOCKING PLANS are not being updated in the mavic. I have created 2 unlock zones that have been approved and that are active in the site (http://www.dji.com/flysafe/geo-system/unlock), however I arrived at the place and still receive the message can not fly "in NFZ zone ". In the remote controler the "unlock list" appears always empty


The two zones are yellow (

Authorization Zones)

Any help ?

Please check the serial number that you wrote down in the info. It might be that you submit a wrong serial number.

DJI Thor Posted at 2017-7-27 23:27
Please check the serial number that you wrote down in the info. It might be that you submit a wrong serial number.

yes, that was the problem

Why the serial number on the mavic sticker below the battery is different from what appears in the DJI GO app "about information" ?

Micronx Posted at 2017-7-28 12:31
yes, that was the problem

Why the serial number on the mavic sticker below the battery is different from what appears in the DJI GO app "about information" ?

It is different between the drone's serial number and the main controller's.