Hi there, I read alot post from DJI forum and not about setting full screen the FPV but i not found any solution. I read the manual guid too ...

My case:
- 1 Inspire 2 with 2 remote control
- 1 X5S
- 1 iPad mini 3 for pilot
- 1 iPhone for film director (dont care)

My target:
I need to set the iPam Mini 3 (mean the pilot remote controll screen) with FULL SCREEN for FPV camere and complete hide/icon the X5s output.

PS.

That's the biggest I can get also have looked at all the settings that I can think of and then some more.... looks like it might not be possible.

Tested on Ipad Pro 12.9 inch

tested as well, I could have swore about a week ago I was able to toggle it to full screen

similarly, it would be nice to have the option to hide the fpv window on the slave

thomasakira Posted at 2017-2-12 12:19
similarly, it would be nice to have the option to hide the fpv window on the slave

Actually you can hide the FPV on the slave.  I was able to do it on mine.  Just keep hitting the minus button till it disappears.

MadFrenchie Posted at 2017-2-14 11:50
Actually you can hide the FPV on the slave.  I was able to do it on mine.  Just keep hitting the minus button till it disappears.

thanks, sometimes its the really simple things that elude me

At least you have FPV, mine vanished all of a sudden. Had to send the drone to support

thomasakira Posted at 2017-2-12 12:19
tested as well, I could have swore about a week ago I was able to toggle it to full screen

Just to clarify, what mobile device are you using?

DJI-Jamie Posted at 2017-2-15 22:27
Just to clarify, what mobile device are you using?

I was using an iphone 7+ at the time

DJI-Jamie Posted at 2017-2-15 22:27
Just to clarify, what mobile device are you using?

Ipad pro 12.9

Just tried it on the Ipad mini same results can't go full screen

How do I see the fpv feed when I don't have the x5s camera attached? I am using s7 phone, only black from what would be the main camera, then the map in the bottom corner, no fpv.

Btw, this is while sitting on the ground.

Also, when the x5s is connected I see the main feed but also just the map in the corner rather than the fpv feed.

Changing a setting to fpv feed in the menu only replaces the main feed with fpv,no picture in picture ?