Hi there has any ever had an issue where you get poor signal qaulity on the RC control  now the Inspire is only 10 ft away from remote

You must be in the city , You are jammed  up big time .

Take it to another location ( like Tucson Arizona )   and try again. ( or another open are will suffice besides Tucson )

donnie

fans34884f17, you could also try custom channels or out of the city as Donnie suggested. Safety first! Ken

i went out to the country side and still get horrible signal quality, check this i conected my inspire 1 remote to p3p and still get horrible signal also these next pictures is the P3P in the exact same place as the inspire and get great signal quality

not sure if my last statment was clear the two picture is the P3p remote connected to the P3P

fans34884f17, NICE test! Is your Inspire new or used? It could be a camera issue or some other hardware issue. Are those bars maxed out before you even take off? Did you try "custom" channel selection to see if you get the same result? It could even be a firmware update causing the problem. Ken

fans34884f17 Posted at 2017-3-8 20:06
not sure if my last statment was clear the two picture is the P3p remote connected to the P3P

That is very strange , perhaps do a re link of the AC and RC .  Are  you currently up to date on your  Inspire system , I mean you dont have to be but for example older AC and RC FirmWare  wont play well with  the most current go apps.

keep us posted, I am interested in what you find
I realize you are posting the P3P frequncy  on the second set of pics. Does the Inspire look as bad as it does in the city , Like the first pics you showed.  

donnie

Highasakite Posted at 2017-3-9 01:55
fans34884f17, NICE test! Is your Inspire new or used? It could be a camera issue or some other hardware issue. Are those bars maxed out before you even take off? Did you try "custom" channel selection to see if you get the same result? It could even be a firmware update causing the problem. Ken

my inspire is only 1 week old. I figured out something if the remote is cold hasnt been used for 8 hours and turn it on it has great connection but after 5 minutes after it heat up i get horrible signal quality. I will post a video. all firmware is all up todate

Donnie Stugots Posted at 2017-3-9 06:14
That is very strange , perhaps do a re link of the AC and RC .  Are  you currently up to date on your  Inspire system , I mean you dont have to be but for example older AC and RC FirmWare  wont play well with  the most current go apps.

keep us posted, I am interested in what you find

all has been updated to newest firmware. ive done these test inside my house and P3P has no issues with my wifi routers which i have 3 2.4ghz wifi Access point and 2 5.8ghz routers. looks like the inspire remote works when its cold or hasnt been used for hours but once it heat up connections fails not just on the HD link but wont connect to RC  will post video soon. also my replacement remote will be here in a few hours

fans34884f17 Posted at 2017-3-9 09:23
all has been updated to newest firmware. ive done these test inside my house and P3P has no issues with my wifi routers which i have 3 2.4ghz wifi Access point and 2 5.8ghz routers. looks like the inspire remote works when its cold or hasnt been used for hours but once it heat up connections fails not just on the HD link but wont connect to RC  will post video soon. also my replacement remote will be here in a few hours

Ok, sounds like a bad diode or surface solder connection going bad Good luck with the new RC Transmitter.

donnie

Donnie Stugots Posted at 2017-3-9 12:11
Ok, sounds like a bad diode or surface solder connection going bad Good luck with the new RC Transmitter.

donnie

so my new remote Model GL658A updated works perfect no issues. returning old remote for a refund

fans34884f17 Posted at 2017-3-9 19:02
so my new remote Model GL658A updated works perfect no issues. returning old remote for a refund

Great , sorry you got a dud.

Have fun

donnie

Great to here the good news  fans34884f17 ! Safety first. Ken

fans34884f17 Posted at 2017-3-9 19:02
so my new remote Model GL658A updated works perfect no issues. returning old remote for a refund

It's good to hear you were able to find the problem. If the RC overall is starting to overheat, it's never a good sign.