Hi,
after using Sandisk Rescue Pro, "Wipe media" I've formated the Sandisk Extreme PRO 64 GB card - both FAT32 and NTFS (win10) - but PH 4 Pro+ keep saying Card Error.
If I try to format card in the app/controller is says "format failed".
What should I do? - any tips?
Thanks, Soren

I am using PC to do this sdcard and put it back my P4PP then reformat again and it work well.

Unfortunately that doesn't help - have tried this.

Have you tried a different card to see if you get the same error?

A different card doesn't have same error; I've been in contact with DJI support; they say I should try to reset drone to factory settings and calibrate the gimbal - I will try this

Just remember a card 32 GB or larger has to be formatted in exFAT NOT FAT 32, and in my opinion works best with allocation unit size set to 32 kilobytes NOT auto.

Good Luck

Yes thank you - have also tried exFAT as DJI support also told me. - didn't help ...

It might just be a bad card, especially if you are not having problems with other cards. I know it's rare for this type of hardware to go bad but it does.