GrahamLN
lvl.3
Flight distance : 337953 ft
United Kingdom
Offline
|
HI, I have recently been using the Profile element of Active tracking filming a car.
This has raised a few issues, whilst the tracking worked superbly, I discovered the following
1. When wanting to engage the Profile option, the sub menu remained in place, obscuring the camera controls on the DJI Go App screen( Phantom Pro + ).
Ok I thought, I will use the record button on the RC - fine then the menu goes after filming commences. However, I had set the camera to record at HD NOT 4K.. I did try tapping the screen to remove the menu so I could see the controls, but that seemed to disengage the Active Track selection.
2. I discovered, after filiming and an earlier filling up of the SD card than expected, the App had switched back to the default of 4K. I tested this later and found that is what happens, as soon as th Tracking mode is engaged, the camera settings change!
3. Currently, I have difficulty in editing 4K videos, due to software/computer issues, apart from the fact the file size is about 10x greater than HD - hence my requirement to use HD at the moment.
4. If the Active track sub menu had not obscured the camera controls, the reversion to 4K would have been easier to spot and the task completed without the need for an SD card change.
So, does anyone have a workaround on this one? I have yet to try switching the camera on to record first, then make the Active Track selection, to see if that overcomes the obscuring and setting change issues above.
I have reported these issues to DJI as a 'GO' snag, but meantime, I would like an answer and a means of using the function without constantly checking to see if settings etc have changed.
Any thoughts please?
Thanks.
|
|