JJB*
Core User of DJI
Flight distance : 12717890 ft
Netherlands
Offline
|
Michi123 Posted at 7-5 22:39
Hi Tony
The problem occured during flight and i was able to regain control shortly after it started spinning. All arms/motors/props are in working order, they dont have a scratch. Firmware is 10.1.1 but, as I've flown maybe 30 packs already, that might not be the problem. Only idea that i could come up with was that maybe the rapid decent in sport mode combined with a forward movement of the drone, as well as the intelligent flight battery plus maybe stalled one of the motors. I could regain control by applying full throttle for two seconds.
Hi Michi,
Had a look at your flightlog, see my chart of your data.
At 16m05.2 for very short moment high pitch and roll angles for your Mini3Pro.
But after that normal values again.
I cannot find any logic to link this to a plus battery. (i fly alot with my plus batt, no probs)
"Motor unable to rotate. Check for objects blocking motor or contact DJI Support for assistance" warningdoes not say that the motor is not running! just low in revs than a normal rev value.
If 1 or 2 motors are hampered in their rotation, than it should be noticed after the flight as well.
And in flight guess it will not do a 'self' repair ;-)
So OR your drone hit something in the air OR a short power supply failure to one or 2 motors....but DAT files shows normal revs.
What can you do ? uh guess nothing, hope it was a spurious malfunction if you are sure it did not hit anything in flight.
My 2 cents it hit something at at that distance and height hard to see i think to be 100% sure it did not hit something.
cheers
JJB [ Charts by FRAP ; the 'best' software for flightlog analysis ]
So what happend
|
-
|