Does anyone know how to chage the states with-in the goggles to show imperial numbers on the lower left had side and bottom? I have trid to go through all of the parameters in the goggles, but can not find nor change it.
The short answer is that you have to move down past what appears to be the bottom of the Options list. The list will scroll upwards, revealing new options including one called "Units".
DroneFlying Posted at 2017-7-6 08:35
The short answer is that you have to move down past what appears to be the bottom of the Options list. The list will scroll upwards, revealing new options including one called "Units".
DroneFlying,
Thanks, I'll check that out, now that I know about the secret menu...lol.
I looked at your video and then when to my goggles and I was able to do it. I was NOT running the latest firmware. Now I see an "AR Auxiliary Settings" tab and I'm not sure what that is. Do you know?
DroneFlying Posted at 2017-7-6 08:35
The short answer is that you have to move down past what appears to be the bottom of the Options list. The list will scroll upwards, revealing new options including one called "Units".
I was NOT running the latest firmware. Hooked it up to DJI Assistant 2 and downloaded. All is good, but now I have an "AR Auxiliary Settings" tab. You know what that is all about?
ProQuad Posted at 2017-7-7 10:16
I was NOT running the latest firmware. Hooked it up to DJI Assistant 2 and downloaded. All is good, but now I have an "AR Auxiliary Settings" tab. You know what that is all about?
Ah, that explains it then. As far as the AR settings go, so far I've only seen speculation about what that's for.
I can't update the FW on the goggles. I updated Mavic to latest fw version. Booted everything up a few times. I don't see that option under language like you show. Tried to plug goggles in to a pc with the DJI assistant 2 running. Logged in. Powered up goggles. Nothing happens. No prompt to update fw. Anyone know how to update fw on the goggles? The assistant on the pc just shows a logo on plugging in a USB. I hear the usb initialize on the PC like it knows something is plugged into it. Thanks.
fastpilot2.sbcg Posted at 2017-7-10 14:32
I can't update the FW on the goggles. I updated Mavic to latest fw version. Booted everything up a few times. I don't see that option under language like you show. Tried to plug goggles in to a pc with the DJI assistant 2 running. Logged in. Powered up goggles. Nothing happens. No prompt to update fw. Anyone know how to update fw on the goggles? The assistant on the pc just shows a logo on plugging in a USB. I hear the usb initialize on the PC like it knows something is plugged into it. Thanks.
I tried several more times with the GO Assistant. Finally got it to show the goggles. Updating FW now.
fastpilot2.sbcg Posted at 2017-7-10 14:32
I can't update the FW on the goggles. I updated Mavic to latest fw version. Booted everything up a few times. I don't see that option under language like you show. Tried to plug goggles in to a pc with the DJI assistant 2 running. Logged in. Powered up goggles. Nothing happens. No prompt to update fw. Anyone know how to update fw on the goggles? The assistant on the pc just shows a logo on plugging in a USB. I hear the usb initialize on the PC like it knows something is plugged into it. Thanks.
Got to turn on your goggles for the PC to "see" it. From there you should be able to upgrade.
Thanks - yes. I tried a few times with goggle power on but the assistant didn't show it. Then finally it worked. Got it updated (was two revisions behind). I then found the imperial setting. Distance sensors still show in meters though but the other important data is in imperial.
Thanks.
Does anyone know how to change the vision sensor from metric to imperial...I got the telemetry to change to imperial, but vision sensor is still in metric