Overview
• Firmware: V 01.04.0000
• DJI GO 4 App iOS: V 4.1.10
• DJI GO 4 App Android: V 4.1.9

What’s New?
• Added QuickShot feature (requires DJI GO 4 app v4.1.10 or higher).
• Added Dynamic Home Point for ActiveTrack mode.
• Added support for Mavic Pro Platinum firmware and 8331 Low-Noise Quick Release Propellers.
• Adjusted the color in Normal mode to Vivid.

This firmware is also an update for DJI Goggles:
• Adjusted the startup volume to be the same as the settings volume.  

Notes:
• Restart the aircraft and remote controller after upgrade is complete.
• Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred DJI GO 4 settings, and readjust them after the update to suit your preference.
• If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4 or DJI Assistant 2, and retry.

Is it possible to downgrade (if needed) and it would be useful to understand what fixes that are included. Not only new features, thanks.

It is that time again for another load of posts regarding problems after this update...

First, we need to get through the login process of DJI Go 4.1.10 which for ios some have trouble with.

And some cannot unlock NFZ using 4.1.10

I am really interested in this quickshot feature!

You don't need to update the firmware to use Quickshot. It works on 03/1000

Once again, Google Play is not showing this release for me.  I JUST got notified this morning for an update to 4.1.9.   Where is 4.1.10?

LP

LeafPeeper Posted at 2017-9-19 06:27
Once again, Google Play is not showing this release for me.  I JUST got notified this morning for an update to 4.1.9.   Where is 4.1.10?

LP

Same here...

Jason65 Posted at 2017-9-19 05:51
You don't need to update the firmware to use Quickshot. It works on 03/1000

Didn't work as it is supposed to on .1000 for me and others. Works perfectly on .0000 for me now though. Very nice.

Adjusted the color in Normal mode to Vivid.
Can we have some elaboration on this? Is there no longer a "Normal" mode?

Thanks.

Just updated, it took 30 minutes including three batteries.
After that I flew one kilometre in 14 minutes for testing.  It flies great!
I had previously version 01.03.800 and was very happy wit that.
It really is an amazing machine. Version 01.04.0000 with app 4.1.10 (iOS) works great.

'Home Point: Me' still doesn't work with my iPhone 7, guess that's an iPhone problem...
Oh, I haven't found the 'new prop' setting. Anyone does?

dr. D Posted at 2017-9-19 06:43
Just updated, it took 30 minutes including three batteries.
After that I flew one kilometre in 14 minutes for testing.  It flies great!
I had previously version 01.03.800 and was very happy wit that.

is it a battery upgrade as well I threw in a second battery to be sure but no upgrade required

Håkan K Posted at 2017-9-19 04:21
Is it possible to downgrade (if needed) and it would be useful to understand what fixes that are included. Not only new features, thanks.

Yes, it's possible to downgrade. But only to 01.03.1000

That is strange,  I put my batteries to my standard charger and it started to charge two batteries simultaneously!
Huh? Is that a new battery-update function?

Standard charger!

dr. D Posted at 2017-9-19 07:04
That is strange,  I put my batteries to my standard charger and it started to charge two batteries simultaneously!
Huh? Is that a new battery-update function?[view_image]

that's cant be right with no battery or charger upgrade

Dave-r Posted at 2017-9-19 07:09
that's cant be right with no battery or charger upgrade

Batteries are upgraded!

Nope, I tried upgrading all my batteries, but there was no prompt.  Don't think this was for batteries.

Also charged batteries afterwards and it charged them one at a time as previously.

My upgrade won't go through for anything...

Had also some issues. Now a lot of beeps. Hopefully it will end and I can use my mavic soon again.

Woah woah, upgrade RC success using DJI Assistant 2 v1.1.6, then Mavic failed at 47%. Tried again the Mavic suddenly blast its fan then immediately shut off. The bottom heatsink was freaking hot to touch. Getting ready ice packs...
Edited: Upgraded successfully. It doesn't seems need to upgrade the rest of the batteries...

fanscd38f8a8 Posted at 2017-9-19 07:30
My upgrade won't go through for anything...

What exactly do you mean?

For this FW update version 4.1.10 of DJI GO 4 is required, but where is version 4.1.10?
I just updated DJI GO 4 from Google Play Store, but only got version 4.1.9.

LeafPeeper Posted at 2017-9-19 06:27
Once again, Google Play is not showing this release for me.  I JUST got notified this morning for an update to 4.1.9.   Where is 4.1.10?

LP

You're not alone, no version 4.1.10 of DJI GO 4 (Android) for me neither, but only 4.1.9!

4.1.10 is ios version. I believe it is 4.1.9 for Android

fansa7dc5944 Posted at 2017-9-19 08:00
4.1.10 is ios version. I believe it is 4.1.9 for Android

Apparently DJI's software deployment still needs lots of improvements.

Overview
• Firmware: V 01.04.0000
• DJI GO 4 App iOS: V 4.1.10
• DJI GO 4 App Android: V 4.1.10

dr. D Posted at 2017-9-19 06:43
Just updated, it took 30 minutes including three batteries.
After that I flew one kilometre in 14 minutes for testing.  It flies great!
I had previously version 01.03.800 and was very happy wit that.

Hola se corrigieron todos los problemas que se mencionan con el antiguo firmware el .1000

Hey guys... Still beeping here... Anyone who can confirm that it had beeped all the time while updateting?

One Mavic and two RC's are updated without any issue ... now it's time for a test fly

We need an update for the Crystalsky as well, to take advantage of theses features...........Come on DJI !!!

Compared to my previous company which provides industrial-grade networking devices, I can just say that DJI's RD and service teams are not qualified enough.

COEZBAY Posted at 2017-9-19 08:13
Hey guys... Still beeping here... Anyone who can confirm that it had beeped all the time while updateting?

No beeping, just one reboot... can u record beeping? Maybe u interrupted update and went to safe mod update?

COEZBAY Posted at 2017-9-19 08:13
Hey guys... Still beeping here... Anyone who can confirm that it had beeped all the time while updateting?

Sorry, no beeping, just the RC vibrating from time to time and the sound of the running fan of the Mavic.

MARSAN Posted at 2017-9-19 08:48
Sorry, no beeping, just the RC vibrating from time to time and the sound of the running fan of the Mavic.

Sure. Here we go https://we.tl/kWq7qM33Wj

COEZBAY Posted at 2017-9-19 08:55
Sure. Here we go https://we.tl/kWq7qM33Wj

I don't like to download an unknown file from an unknown source.
Can't you describe the problem?

FW update of two Mavics went flawlessly for me.

COEZBAY Posted at 2017-9-19 08:55
Sure. Here we go https://we.tl/kWq7qM33Wj

Never heard of that on mavic...  sound's like p3s update contact support ASP

MARSAN Posted at 2017-9-19 09:15
I don't like to download an unknown file from an unknown source.
Can't you describe the problem?

It's just an .mp3 on weshare

Tiho Posted at 2017-9-19 09:31
Never heard of that on mavic...  sound's like p3s update  contact support ASP

Yeah guess I'll do that. Thx anyway

Do i need this update? I going away in the weekend and i really want the drone with me and i dont want to update, if it fails and get bricket e.t.c..