Hi! I just bought these filters, and didn't find any review of them on the spark, so here's a quick review I made today:

Have you tried to attach the filter upside down to your try?
It might be, they get attached from the bottom side?
Easier to get it onto the cam, I think

S-e-ven Posted at 2017-10-25 09:28
design flaw? Have you tried to attach the filter upside down to your try? it might be, they get attached from the bottom side? Easier to get to the cam, I think

It's not possible to attach them the other way/upside down

d0ppler Posted at 2017-10-25 09:28
It's not possible to attach them the other way/upside down

Thats a pitty then! The gimble will always "overload", as soon you use trypodmode an try to shoot + angles

Well, technically you can in some way fit them upside down, but they won't snap into place, and once they are "in place" the camera has even less movement.

d0ppler Posted at 2017-10-25 09:34
Well, technically you can in some way fit them upside down, but they won't snap into place, and once they are "in place" the camera has even less movement.

Yep, but only to the -85, I think
Which you control entirely by urself
The + in Sportsmode however......
Anyway, if they dont snap, it is certain, they arent made for that setup.
And also not really made for the "top" attaching either.

Strange to see this design flaw if you design something for a specific purpose.

Montfrooij Posted at 2017-10-25 09:55
Strange to see this design flaw if you design something for a specific purpose.

Indeed! It just proves that Sandmarc just skipped the quality assurance test completely

I have the Sunnylife ones, same thing happens.
I reckon any of them where a clip goes over the top, will clash with the gimbal arm.
I can't remember the brand, but I remember seeing a filter with a metal clip? that looked thinner so might fit between gimbal and gimbal arm?
I also remember seeing another filter where you stick on a piece of plastic above and below the camera lense for the filters to attach to? Wonder if the weight overloads the gimbal?

The Polarpro ones work like a charm, I have had 0 problems with them.

d0ppler Posted at 2017-10-25 10:08
Indeed! It just proves that Sandmarc just skipped the quality assurance test completely

Unbelievable.
Thanks for pointing this out!

The video demonstrates the filters well. But please notice that the third party accessories are not tested. If may have an influence on the stability of the gimbal.

These are the filters I'm going to get next month, they seem more suitable for Sparks gimbal...I might post a little review of these when i have tested them

sparkguygc Posted at 2017-10-25 16:06
I have the Sunnylife ones, same thing happens.
I reckon any of them where a clip goes over the top, will clash with the gimbal arm.
I can't remember the brand, but I remember seeing a filter with a metal clip? that looked thinner so might fit between gimbal and gimbal arm?

PolarPro - DJI Spark Cinema Series Vivid Collection Filters

Javey Posted at 2017-10-25 16:50
The Polarpro ones work like a charm, I have had 0 problems with them.

Ops, saw your reply to late

S-e-ven Posted at 2017-10-26 00:28
PolarPro - DJI Spark Cinema Series Vivid Collection Filters

https://www.youtube.com/watch?v=CIfV1BhfhcA

Perfect thanks.
So the clip is thin enough to slide between gimbal and gimbal arm?

sparkguygc Posted at 2017-10-30 16:08
Perfect thanks.
So the clip is thin enough to slide between gimbal and gimbal arm?

Watch the video, mate.