Hello fellows,


Last week I received my 7th channel leveler kit and las night i try to install it to my RC of the Phantom 2 Vision Plus.


I have to problems that i can't find a video anywhere.


First is, if it's easy or posibble to disconnect the microUSB and the Batterry cable in order to work easier.


And the second, i bought the leveler that i have been recomended and read it would work, but la night when i try, the stick didnt fit through where it is supposed.


If anyone can help, i'll appreciate it!


Thanks in advance

7th channel isn't enabled just yet but will be shortly.  You haven't provided a link or description to which lever you bought but I've had no problems with the install from a cheap Chinese carbon fibre one. More details needed but until the 7th channel is enabled by DJI's firmware I wouldn't worry about it.

shacks86 Posted at 2014-10-24 06:03
7th channel isn't enabled just yet but will be shortly.  You haven't provided a link or description  ...

This is the one i bought

http://www.amazon.com/gp/product ... 0?ie=UTF8&psc=1

I know but since i bought i want to install it.

This is was going on

youve it installed incorrectly

the cross ( X ) should sit down into the yellow pot inside the radio.
turn that steel shaft the other way around

look at this video, the lever install is near the end

Eirlink Posted at 2014-10-25 06:04
youve it installed incorrectly

the cross ( X ) should sit down into the yellow pot inside the radio ...

Thanks for the video.
And I know the X goes the other way, just took the picture to show that it doesnt go through easily.

Get it replaced with one that fits or get your money back which Amazon is pretty good at doing.  Ide say your other option would be to drill out the hole a little more if your comfortable with that.  It may be a dodgy batch but either way get it sorted before that firmware is released and demand outstrips supply.

Eirlink Posted at 2014-10-25 06:04
youve it installed incorrectly

the cross ( X ) should sit down into the yellow pot inside the radio ...

Good linked video