Who has updated? Is the test questions still there? Are there any bugs?

No bugs at all mate. No more tests (in the UK - only had to d one so far) - lots more battery info. Flew twice yesterday and no issues.

You should state is it ios or android.
Dji go .22 for android crashes for everyone mid flight

A CW Posted at 2018-1-7 13:07
No bugs at all mate. No more tests (in the UK - only had to d one so far) - lots more battery info. Flew twice yesterday and no issues.

Thanks. I want to update but it’s raining so no test flights.

Woe Posted at 2018-1-7 13:28
Thanks. I want to update but it’s raining so no test flights.

Yeah, don't go flying indoors now LOL

fansfb1bf277 Posted at 2018-1-7 13:23
You should state is it ios or android.
Dji go .22 for android crashes for everyone mid flight

My bad. I didn’t specify because I knew update for android came out over a week or so ago. I just got notification for update today iOS.

A CW Posted at 2018-1-7 13:29
Yeah, don't go flying indoors now LOL

I was thinking about it. Lol not.

android here - i am back to pixilation problems with new version :-(

I've tested DJI GO 4.1.22 with Firmware v01.04.0100 and found new problems First I must say the the image IS NOT PIXELATED as it was with ver: 4.1.18, but now it has a new sets of problems: 1) The "Postion" (Equipment) page does not open,  you can only access the "RC" setup, so you cannot change any parameters i.e. RTH altitude, Max distance, sensibility, turn off sensors,etc.  2) It does not go into "SPORT" mode, it just does not respond to the switch on the RC You can access the "In-Flight" page but that is only information I have two remotes linked to the same Mavic, the one connected to an old phone running DJI GO 4.1.15 works perfeclty, jumping to SPORT and giving you access to all settings Version 4.1.22 is the one with problems, and I have tested both simultaneously (link to one Mavic on the air), so I have no doubts it is an APP related problem Both remotes and Mavic have the latest firmware installed and the phone running version 4.1.22 is a BLU Energy XL  (AArch64 octa-core processor at 1.3 Ghz, 3 GB RAM, 64 GB ROM, 1080*1920 resolution) which I have used with all previous versions with no problems, so I am ruling out this piece of equipment Does anyone else have these problems? Any suggestion to help me solve or troubleshoot it would be highly appreciated I uploaded a short video with the failure (not including the "SPORT MODE" to keep it short

I've tested DJI GO 4.1.22 with Firmware v01.04.0100 and found new problems
First I must say the the image IS NOT PIXELATED as it was with ver: 4.1.18, but now it has a new sets of problems:
1) The "Position" (Equipment) page does not open,  you can only access the "RC" setup, so you cannot change any parameters i.e. RTH altitude, Max distance, sensibility, turn off sensors,etc.
2) It does not go into "SPORT" mode, it just does not respond to the switch on the RC
You can access the "In-Flight" page but that is only information
I have two remotes linked to the same Mavic, the one connected to an old phone running DJI GO 4.1.15 works perfeclty, jumping to SPORT and giving you access to all settings
Version 4.1.22 is the one with problems, and I have tested both simultaneously (link to one Mavic on the air), so I have no doubts it is an APP related problem
Both remotes and Mavic have the latest firmware installed and the phone running version 4.1.22 is a BLU Energy XL  (AArch64 octa-core processor at 1.3 Ghz, 3 GB RAM, 64 GB ROM, 1080*1920 resolution) which I have used with all previous versions with no problems, so I am ruling out this piece of equipment
Does anyone else have these problems? Any suggestion to help me solve or troubleshoot it would be highly appreciated
I uploaded a short video with the failure (not including the "SPORT MODE" to keep it short

4.0.4 works for me....

GO v4.1.22 working fine for me on Android 7.0 (S8+).

I wish I could but I have a Crystalsky and I'm still on 4.1.18

I've used DJI GO 4.1.22 with Firmware v.01.04.0100 today. Everything worked as expected without any problems on my Huawei P10 Lite. Used all three batteries while the app ran perfectly. I LOVE my Mavic.

Bachi i think u need a better spec'd device....what is "blue"?

Updated to iPhone 6, iOS 11.2.2,, no problem with the App loading and viewing. Will fly with it today and see how a works.

Locoman Posted at 2018-1-9 04:41
Updated to iPhone 6, iOS 11.2.2,, no problem with the App loading and viewing. Will fly with it today and see how a works.

Cool I’m going to update my 5s first, test flight than update my iPad. Thanks

Just noticed that my iPad mini 4 is showing the GO4 .22 app update in the App Store. of course it was released 6 days ago, but this is the first time it has ever shown up in the app update mode. Usually I have to delete the app and then reinstall the new app, maybe I don't wait long enough for it to show up. I still have 4.1.20 on my iPad and won't update it until I test fly with my phone today. I never update both devices at the same time so if I have problems with the update, I still will be able to fly with the older version. At least I won't be dead in the water, waiting for a fix. So will test out the iPhone today and report latter.

Locoman Posted at 2018-1-9 05:05
Just noticed that my iPad mini 4 is showing the GO4 .22 app update in the App Store. of course it was released 6 days ago, but this is the first time it has ever shown up in the app update mode. Usually I have to delete the app and then reinstall the new app, maybe I don't wait long enough for it to show up. I still have 4.1.20 on my iPad and won't update it until I test fly with my phone today. I never update both devices at the same time so if I have problems with the update, I still will be able to fly with the older version. At least I won't be dead in the water, waiting for a fix. So will test out the iPhone today and report latter.

Cool looking forward to hearing from you.

Woe Posted at 2018-1-9 05:11
Cool looking forward to hearing from you.

to windy to fly yesterday, hopefully will be better today

crash at 600 mtr(android) Samsung A5(2017) version 4.1.22 and firmware 0100

Yup, updated a couple of days ago ... so far so good!

Updated to 4.1.22, no pixelated

Fly for 1 mile away, with samsung tab s2 8", firmware 0100

Locoman Posted at 2018-1-10 02:47
to windy to fly yesterday, hopefully will be better today

I going too try today as well. I updated my iPhone. I’ll update iPad next.

Beeworld Posted at 2018-1-10 03:02
Yup, updated a couple of days ago ... so far so good!

iOS or android

i have updated - the map test question is there - so far i am having the least buggy system compared with problems on the last few versions.

Woe Posted at 2018-1-10 05:11
iOS or android

iOS - iPhone5s

Beeworld Posted at 2018-1-11 02:05
iOS - iPhone5s

I did a test flight yesterday, first battery had terrible pixelation looked like jail stripes. Second battery was okay but I had to remove my Nd filter so I will give more tests today.

Have the Pixallation  issue with the latest version, on a Sony Xpera XZ

really annoying almost unuseable  

NOT HAPPY: This is what my screen looks like after latest go4 update in manual settings.

Here’s what it looks like in manual

Thats your over exposure warning, turn it off in camera settings or roll the right wheel and it will go away.

Updated for Samsung S7 Edge, flew for around 25 minutes and all good no issues with video & photos vs normal and tripod modes today.

Simmo1 Posted at 2018-1-14 15:40
Thats your over exposure warning, turn it off in camera settings or roll the right wheel and it will go away.

That’s not it.

Any advice from administrators. Dji Thor. Dji Grace or Dji Susan. Anybody?

Woe - turn everything on - go into the app and tap reset camera in the camera settings menu. This takes the camera only back to factory defaults. Calibrate the gimbal afterwards then configure all of your video and photo settings from scratch. You’ll also need to go back into the RC settings in the app afterward and set the live feed back to normal from HD or you won’t be able to shoot in 4K. Hope this helps, if not - refresh the FW using Assistant 2. Let me know how you get on.
Andy

A CW Posted at 2018-1-15 16:00
Woe - turn everything on - go into the app and tap reset camera in the camera settings menu. This takes the camera only back to factory defaults. Calibrate the gimbal afterwards then configure all of your video and photo settings from scratch. You’ll also need to go back into the RC settings in the app afterward and set the live feed back to normal from HD or you won’t be able to shoot in 4K. Hope this helps, if not - refresh the FW using Assistant 2. Let me know how you get on.
Andy

Thanks for your response. I went ahead and updated everything and it’s good to go. Thanks. I was really close to pulling out my hair, and I’m bald. Lol

Woe Posted at 2018-1-15 16:29
Thanks for your response. I went ahead and updated everything and it’s good to go. Thanks. I was really close to pulling out my hair, and I’m bald. Lol

Glad thats fixed it!

Updated and flew, once. Android app stopped, somewhere along my 10 minute flight with goggles. Goggles were flawless, as usual, however...