My screen on my device says aircraft in attitude mode, so it will not hover. Can anyone tell me how to switch it out

Sure that's not Atti?   Switch to P mode

ALABAMA Posted at 2018-1-10 18:14
Sure that's not Atti?   Switch to P mode

Lol, No im 100% sure it says Attitude. ...I know I had to look twice.

That's common when powered up while still indoors. Take it outside and be sure you have the controller in P-Mode. On the P3S it's the right switch all the way forward.

LarBear360 Posted at 2018-1-10 19:45
That's common when powered up while still indoors. Take it outside and be sure you have the controller in P-Mode. On the P3S it's the right switch all the way forward.

Thank You very much!

djiuser_M46eJhw Posted at 2018-1-10 20:20
Thank You very much!

Sir, I would recommend you read the user manual carefully. Please fly in a place with good GPS signal. Thanks for your support.

ATTI is in fact short for ATTITUDE ...

The format is ATTITUDE control ... where AC only stays directional attitude but drifts / does not enter stable hover.

AS another says - go outside into clear area and power up ...

If you are indoors - the AC cannot pick up SATS for P-GPS mode.

Nigel