I just realized that when i registered with the FAA they want the registration number on the drone. Can I ask what you use to put the numbers on? Dont want to mess with teh weight or flight of the drone.

Dymo label maker -small print on the label placed inside the battery compartment

Blank sticker - number printed on it

You can always use a Sharpie....

I bought printed labels on eBay that are made for the Spark. They cost me like $5, but they work great. Just do a search for "Spark drone label". There are a couple of vendors with great solutions!

I literally just printed the certificate twice and cut out the reg number neatly then with a small amount of tape, I put it in my battery compartment. Ezpz

Trip Astute Posted at 2018-1-21 18:50
I bought printed labels on eBay that are made for the Spark. They cost me like $5, but they work great. Just do a search for "Spark drone label". There are a couple of vendors with great solutions!

In case you're interested, here's what they look like!

Trip Astute Posted at 2018-1-21 22:04
In case you're interested, here's what they look like!
[view_image]
[view_image]

Thanks for sharing this. We would recommend users follow the local regulation.

Trip Astute Posted at 2018-1-21 22:04
In case you're interested, here's what they look like!
[view_image]
[view_image]

Thank you for the post. I also like the reward if found sticker. Great idea!!

You can wight it on the drone or i used a lable maker and put it on the battery it just needs to be found on the drone

but tools can be used to get to it

Trip Astute Posted at 2018-1-21 22:04
In case you're interested, here's what they look like!
[view_image]
[view_image]

Thanks for sharing great fine