Please select Into the mobile phone version | Continue to access the computer ver.
n3 flight controiller
994 5 2018-4-21
Uploading and Loding Picture ...(0/1)
o(^-^)o
dynamo_au
lvl.2
Australia
Offline

hi guys
i own a dji s800 which had a wookongnow it sports a n3 controller problem i have is motors wont arm any ideas  PLEASE

2018-4-21
Use props
DJI Elektra
Administrator
Hong Kong
Offline

Hi, there. Any error message? Please tell us more details about the problem you encounter.
2018-4-22
Use props
dynamo_au
lvl.2
Australia
Offline

fixed the arming problem still not happy 1st test it raised of the ground then flipped on its back
2018-7-13
Use props
fansed722954
lvl.2
Flight distance : 34892 ft
United States
Offline

Do you have a 6s battery installed? i have 3 S800's and i had exact same problem. i had a 14.8v 10,000mAh 4s lipo in one o
2018-9-25
Use props
djiuser_IR6hM5p0cX13
lvl.2
Flight distance : 65643 ft
Sweden
Offline

dynamo_au Posted at 2018-7-13 18:57
fixed the arming problem still not happy 1st test it raised of the ground then flipped on its back

have you checked all the wiring? by that motors spin in the right direction? a rough flip indicates that you have a motor/s not spinning in the right direction or propellors wrong also check the oreintation of the FC check the status of the IMU
2019-11-17
Use props
AndreasKielb
lvl.2

Germany
Offline

How did you fix the motor don't arm problem and later did you find a solution/reason for the flip over?
I also can't get the motors of my s800 to arm with the N3 but I also think the ESC calibration doesn't really work:
https://forum.dji.com/thread-204832-1-1.html
2019-12-21
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules