GAHeath
lvl.1
Flight distance : 1067717 ft
United States
Offline
|
Daroga Posted at 2018-5-2 10:38
GA,
The two RCs communicate with each other for Master/Slave operations via 5.8GHz using the right white blade antenna on the RC (inner part of the blade facing you) as you are holding the RC when flying. Here's a previous post about the antenna -> Click this link to view the previous post about Inspire 1 Master Slave communication....
So, just to rule out simple things, double check that your antenna are vertical and that there is clear line of sight between the two unit's right antenna (right as you are holding the RC while flying).
I have been away from the remote that came with the bird for a little time (work and other issues). The remote that came with the inspire will have to go back to DJI. In the IOS app where you can call up the remote's serial number it displays N/A rather than the serial number so there is an issue inside the remote. When I get back to the remote I plan to look into the issue a little further but currently I can do little as I do not have access to it. |
|