Hello everyone,

I have a problem with my drone after last update of DJI GO 4 v4.2.14, the sport mode doesn't work! When I switch it on, nothing happens - besides that on the screen shows an information "intelligent flight mode haven't been enabled". I was looking for this option in the MP menu but there is no such one! I searched whole menu looking for this option.
I tried to use OTG and WIFI connection, on both there is the same problem.

Any ideas how to fix it?

PS.
After this update Camera Down/Forward (Function button) also stopped working.

Thank in advance for every reply.

Enable this:

sparkuser Posted at 2018-5-14 04:43
Enable this:
[view_image]

This option doesn't exist in Sparks MC settings. I wrote that in my post.

Sparks MC settings menu.

blokee Posted at 2018-5-14 04:50
This option doesn't exist in Sparks MC settings. I wrote that in my post.

Find an micro USB OTG adapter, connect whatever your phone needs to it
Plug in the phone
Switch on  the RC
Wait till red LED is stabil
plug in otg micro plug in RC
start the drone
"go fly"
check again, now you should see the switch
And it need to be "on" (green)

S-e-ven Posted at 2018-5-14 05:05
Find an micro USB OTG adapter, connect whatever your phone needs to it
Plug in the phone
Switch on  the RC

Oppi:
"I tried to use OTG and WIFI connection"

If you don't see it in the latest Go4 Version, uninstall that and install an old one.
4.1.15 would be my choice!
And switch back to the new one, after the setting is done

S-e-ven Posted at 2018-5-14 05:07
Oppi:
"I tried to use OTG and WIFI connection"

Thank you!
I did as you said and it worked I downloaded the older version (4.1.15), used OTG cable to pair the drone and then the possibility to enable the intelligent flight modes showed up!

blokee Posted at 2018-5-14 08:50
Thank you!
I did as you said and it worked  I downloaded the older version (4.1.15), used OTG cable to pair the drone and then the possibility to enable the intelligent flight modes showed up!

so now "we" hope, that it stays as selected, after updating to latest Go4!
But in case that not, you know now how to get around it.
If needed, upgrade not to the latest but to the sec. latest, next time.

There is a lot "wrong" on the actual DJI Go4, which needs to workarounded by using an older version of this app.
DJI, what is wrong with that app?

S-e-ven Posted at 2018-5-14 08:56
so now "we" hope, that it stays as selected, after updating to latest Go4!
But in case that not, you know now how to get around it.
If needed, upgrade not to the latest but to the sec. latest, next time.

I've just installed the latest version and everything works fine Even the function button (camera forward/down) starts working!

I am wondering why the installation of the latest version for the first time made so many problems. As we can see the solution is to back to the older version and then install the newest one again. It's strange.

I have the feeling that sticking to 4.2.12 and ignoring "latest version available" is not the worst! ;-)

S-e-ven Posted at 2018-5-14 09:21
I have the feeling that sticking to 4.2.12 and ignoring "latest version available" is not the worst! ;-)

I decided to install the newest one because of the OTG connection. Unfortunately using wifi the maxiumum range for my spark is about 150m... Using OTG it raises to 500m.

Thanks again, with your help I can fully enjoy my drone!