Good afternoon guys, I need some help. I use version 4.2.14 and am using the OTG cable. Yesterday I went to take a flight and put in the sport mode and the following message appears: "Intelligent Flight Mode have not been enabled. Enable this option in Main Controller Settings if Needed."

I searched for videos on the internet on the subject but did not find anything, it does not accept the Sport Mode neither with OTG cable nor with with wifi connection.

I have already seen in this forum some questions for the same problem but none has effectively solved my problem. Anyone have any idea what it can be?

Did you see today's thread with using another version od DJI app?

https://forum.dji.com/thread-148359-1-1.html?

Hi Maxhenriques, In the Dji Go 4 main screen( Spark and RC connected) tap on the Controller symbol on the left of the screen and you will be prompted to accept risks of engaging Intelligent flight Modes!
Just agree and different flight modes will appear! Good Luck and enjoy..

I can't help too much but in my case after reviewing with DJI tech support,  I returned my unit and they replaced it under warranty.  There was a motherboard problem.

My spark would not enter sport mode.....I would get the same message you got.

Please use wifi connection instead. If you fail to enter sport mode again, please ensure that you are not in beginner mode. OTG cable is not fully tested, thanks for your understanding.

Did you enable Intelligent Flight Modes in the options?
Else sport mode switch does not make the ac faster.

I connected through the wifi and it did not work, none of the options presented here solved the problem. I just have not tried to uninstall the DJI GO 4 application and install an older version.

Install the version 4.1.15 you will be safe on Android. Many of these New Updates have Bugs, slowly we are seeing more bugs emerging.

Else go IPhone for less problems.

DJI didn't update any Firmware since December 2017 anyways for the Spark.

Be sure you set the sport-switch to off when start up rc, spark and then app. Sometimes sportmode can be switch on on certain devices if you start with sport-switch to on.  

Anyone figure this out?  My Spark won't go into sport mode either.

Are you using a cable?
If yes, and you dont see a switch in the settings for "multiple flight modes" (google for a picture),
get a andoid phone with a version 4.1.15 GO4 cabled to your RC.
Activate "multiple  ...." and try if it worked.
Switch back to the actual app after

None of the options reported here worked. I tested all

Just to confirm:

You see this switch and it is "on" (green)?

S-e-ven Posted at 2018-6-4 09:38
Just to confirm:

You see this switch and it is "on" (green)?

what is the version of the SPARK firmware and RC firmware that you are using.  That will explain your issues. A screen shot will be better from the About page.

S-e-ven Posted at 2018-6-4 09:38
Just to confirm:

You see this switch and it is "on" (green)?

This item does not appear in the spark, at least not n my spark

Maxhenriques Posted at 2018-7-16 11:38
This item does not appear in the spark, at least not n my spark

Hi, may we have the firmware and app version of your DJI Go 4 app, I would suggest providing the screenshot of the issue for further analysis.

Maxhenriques Posted at 2018-7-16 11:38
This item does not appear in the spark, at least not n my spark

Are you using an otg cable, or not?
This shows up if connected to the RC via hardwire, but not if Wifi connected.
And as long you dont see it, you cant check if it is on or off

If you use a cable already, change back to 4.1.15 (android) for the check
If you dont use a cable: USE on for checking