Please select Into the mobile phone version | Continue to access the computer ver.
Ocusync Air Unit Telemetry/OSD Failure
835 5 2018-7-14
Uploading and Loding Picture ...(0/1)
o(^-^)o
KurtGuy
lvl.2
Australia
Offline

Hey DJI,

I've noticed that the Telemetry / OSD on the DJI Goggles RE via the Ocusync Air Unit on my drone is not working while armed. I've attached a link for a video to show a example (http://youtu.be/Wx4mS85zxzE). Everything works fine while disarms but the second you arm the drone the Voltage / Current / Horizon Level all freeze up and dont update until you disarm the drone again. I have tried Firmware V01.00.300 / V01.00.400 / V01.00.500 and Betaflight versons 3.2 / 3.3 / 3.4

Hardware Setup:
Mateksys F405CTR F4 Flight controller (Betaflight 3.4)
DJI Ocusync Air Unit (Current Firmware)
DJI Goggles RE (Current Firmware)

I can see most people have this problem and i was hoping the latest update would fix this issue but seeing i have just updated and tested it now ive found that it still doesnt. Is there any fix anyone knows of or can this be passed onto engineers to be fixed for the next update???

Thanks.
2018-7-14
Use props
DJI Susan
Administrator

Offline

Hi KurtGuy, just to verify, both the Goggles RE and Air Unit have been updated to v 1.0.5.0, right?
2018-7-16
Use props
KurtGuy
lvl.2
Australia
Offline

DJI Susan Posted at 2018-7-16 00:27
Hi KurtGuy, just to verify, both the Goggles RE and Air Unit have been updated to v 1.0.5.0, right?

Yes that is correct. Both were updated via the DJI assistant before the video in the link was made.
2018-7-16
Use props
DJI Susan
Administrator

Offline

KurtGuy Posted at 2018-7-16 00:56
Yes that is correct. Both were updated via the DJI assistant before the video in the link was made.

Thanks for getting back to us. I'll forward to our engineers for review and will come back as long as there is an update.
2018-7-17
Use props
KurtGuy
lvl.2
Australia
Offline

DJI Susan Posted at 2018-7-17 22:07
Thanks for getting back to us. I'll forward to our engineers for review and will come back as long as there is an update.

Thank you a few people have this problem and would really love a fix.
2018-7-17
Use props
KurtGuy
lvl.2
Australia
Offline

Any progress on this?
2018-8-21
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules