Hi there,

I appreciate this topic has been covered many times over but I have recently had the ESC status error. If someone could help by sending the link that would be much appreciated as I need to use the drone asap!

Thanks

Sam

Hi Sam, we're sorry for the inconvenience. Just to verify, does the issue just appear after updating the firmware? If yes, please kindly check the link I sent in PM and see whether it helps.

DJI Susan - seeing if you could send link to download 1.11.30? Current fw 1.11.20 believe bricked camera gimbal. Now that I've installed a new camera gimbal image transmission and gimbal are restored to normal but I'm having ESC errors that will not let the motors start.

Sorry left out my aircraft is a P3P w/ 1.11.20 fw. RC is up to date as well as dji go app.

My P3P is now giving me an 'ESC Status Error'... what do I do to fix this?

fansfde4baab Posted at 2018-7-30 17:49
My P3P is now giving me an 'ESC Status Error'... what do I do to fix this?

I show 1.11.0020

I have the same problem, so, i updated to 1.11.0030. The log shows all ok but continues the ESC error. I have only one doubt, when i Start DJI GO app, it shows me that the firmware version is 1.11.0020 even when update was ok at log. Does it have to show me 1.11.0030?

Downgraded to 1.8.80 and ESC error persist. What is next step?

DJI Susan Posted at 2018-7-29 20:31
Hi Sam, we're sorry for the inconvenience. Just to verify, does the issue just appear after updating the firmware? If yes, please kindly check the link I sent in PM and see whether it helps.

Ok, updated again to 1.11.30, now shows me 1.11.20+. I've read in another post that is ok. So, ESC error persist. COuld be helpful when I  send you DAT files from the aircraft?

solved. Was a bad welding job at one of the motors. Welded correctly and voilá, no more ESC error and fly normal.

djiuser_eBs7nodbSda4 Posted at 2018-7-30 12:02
DJI Susan - seeing if you could send link to download 1.11.30? Current fw 1.11.20 believe bricked camera gimbal. Now that I've installed a new camera gimbal image transmission and gimbal are restored to normal but I'm having ESC errors that will not let the motors start.

Sorry for the late response. I've sent the link in PM, please kindly check whether it is the correct one.
BTW, please click the reply button under my message so that I can get the reminder and handle it timely, thanks so much!

fansfde4baab Posted at 2018-7-30 19:16
I show 1.11.0020

Just to verify, does the ESC error only appear after updating to the latest firmware? If yes, please kindly check the link I sent in PM for update.

Pep Salou Posted at 2018-8-1 20:55
solved. Was a bad welding job at one of the motors. Welded correctly and voilá, no more ESC error and fly normal.

Anyway, glad to hear the issue has been figured out. Fly safe!

DJI Susan Posted at 2018-7-29 20:31
Hi Sam, we're sorry for the inconvenience. Just to verify, does the issue just appear after updating the firmware? If yes, please kindly check the link I sent in PM and see whether it helps.

Dji susan im also getting a esc error after i updated the firmware can i get the link please

DJI Susan Posted at 2018-7-29 20:31
Hi Sam, we're sorry for the inconvenience. Just to verify, does the issue just appear after updating the firmware? If yes, please kindly check the link I sent in PM and see whether it helps.

Dji susan im also getting a esc error after i updated the firmware can i get the link please

fans6d057212 Posted at 5-15 12:16
Dji susan im also getting a esc error after i updated the firmware can i get the link please

May I know which drone do you refer to? P3A or P3P? I'll send you a message in PM, please kindly check later.

DJI Susan Posted at 5-16 18:53
May I know which drone do you refer to? P3A or P3P? I'll send you a message in PM, please kindly check later.

Phantom 3 advanced

DJI Susan Posted at 5-16 18:53
May I know which drone do you refer to? P3A or P3P? I'll send you a message in PM, please kindly check later.

P3a
Thank you

fans6d057212 Posted at 5-18 01:08
P3a
Thank you

Well received, please kindly check my message in PM and let us know if there is any further question.

DJI Susan Posted at 5-18 02:49
Well received, please kindly check my message in PM and let us know if there is any further question.

Where do i get the link?

DJI Susan Posted at 5-18 02:49
Well received, please kindly check my message in PM and let us know if there is any further question.

I didnt get the link

fans6d057212 Posted at 5-18 14:59
I didnt get the link

It's a dropbox link, I've resent it in PM, please kindly refer to the below screenshot to check.