can anyone help me please

Hi there, sorry for the trouble. Did you receive an error message on the APP? What is the current firmware?May I know if the issue started after a crash or firmware upgrade?

DJI Paladin Posted at 2018-8-2 04:56
Hi there, sorry for the trouble. Did you receive an error message on the APP? What is the current firmware?May I know if the issue started after a crash or firmware upgrade?

it was after a firmware upgrade about a week after done a couple short flights it has the latest firmware upgraded about a month ago when I switch on I got 2 red lights then other 2 are yellow blinking fast then the y go green

Have you tried a gimbal calibration and flashing the firmware?

ALABAMA Posted at 2018-8-2 05:22
Have you tried a gimbal calibration and flashing the firmware?

I tried a gimal calibration is said failed some said try imu and I don't know what flashing firmware means im trying to connect to dji assistant but it wont connect either Thanks for your reply

ALABAMA Posted at 2018-8-2 05:22
Have you tried a gimbal calibration and flashing the firmware?

I have just done an imu calibration and after 100% its still the same

Try doing the update again and see if that helps.

ALABAMA Posted at 2018-8-2 06:47
Try doing the update again and see if that helps.

what do you mean do the firmware again can you tell me what I have to do please

ALABAMA Posted at 2018-8-2 06:47
Try doing the update again and see if that helps.

what do you mean do the firmware again can you tell me what I have to do please.

Interested ... Your signature says Mavic Pro and Phantom 4 Pro  - but nothing about a P3 Pro ...

Anyway ... Assistant is no use to you on a P3 ... they are not compatible.

it was my very first drone and havnt flown it for a year but kept batterys charged every 3 months and just got it out the attic

You can update thru the Go app.  Format your card, then  follow intructions in the manual.

k sorry but my go app isn't telling me to update I done a firmware update a month agp

fansf9c14e10 Posted at 2018-8-2 05:10
it was after a firmware upgrade about a week after done a couple short flights it has the latest firmware upgraded about a month ago when I switch on I got 2 red lights then other 2 are yellow blinking fast then the y go green [view_image]

Kindly check this link: (https://store.dji.com/guides/troubleshooting-gimbal-error/). If the issue is still the same, I would suggest  you contact our support team to start up a case: (https://www.dji.com/support?site=brandsite&from=nav). You can provide the case number here if in case you need further assistance. Thanks for understanding.

DJI Paladin Posted at 2018-8-2 08:46
Kindly check this link: (https://store.dji.com/guides/troubleshooting-gimbal-error/). If the issue is still the same, I would suggest  you contact our support team to start up a case: (https://www.dji.com/support?site=brandsite&from=nav). You can provide the case number here if in case you need further assistance. Thanks for understanding.

I have done a firmware update that dji gave me yesterday its cured the twitching but gimbal is still wonky
(P3X_FW_V01.11.0030.bin)