My I2 will not hover in place when my RS lever on the cendence remote (assigned to Pitch/Roll speed) is set anything other than max, or all the way up. The I2 will start rolling left. As soon as I set the RS lever all the way up, the drone actually returns to where it was set to hover.

I've tried calibrating the cendence remote and it still does it. I need to make sure to take off with the RS set all the way up, other wise it just takes off and rolls to the left. Also cannot fly straight.

Anyone else experiencing this on the latest firmware?

My app, CrystalSky Ultrabright 7.85, I2 and cendence remote are all on the latest firmware/software versions.

Hello. Sorry for the late response. Did you try to refresh the firmware using DJI Assistant 2?

Re-install the existing firmware?
UPDATE: Ok, I see the refresh option, I'm in the process of performing the refresh will report back with results.

The latest update improves the stability in a hover. However, it introduces some other minor issues. I would wait for the next update.

Salvador Garza Posted at 2018-8-19 12:36
Re-install the existing firmware?
UPDATE: Ok, I see the refresh option, I'm in the process of performing the refresh will report back with results.

Alright. Please let us know if it didn't work.

Same behavior as originally reported even after refreshing the firmware. This issue may lead to serious crashes. The I2 becomes uncontrollable until the roll/pitch slider is removed from the min position.

Which FW version are you on? I'm on .0100 and observing slight drift to left during initial straight forward. After performing some yawing, however, this anomaly disappears. Must check if there's any relation to RS lever position or not, I'm not even sure if it's assigned to anything at all.