Hello,

I got red light on my remote jest beside power switch. what does this mean?

and sometimes remote can not connect to my DJI app on my phone. app is woking but there is o camera feed from my drone. link between remote and drone is OK, since I can ajust tilt of the camera up/down

smaller green LED for batery status are 2 or 3 `on`  so I guess battery is charged OK for flight.

can somebody explain?

Have you updated the firmware, or crashed lately?

Connection from the RC to AC failed. Relink that parts together.

no crashes ever!!!

no I did not update to 1.9 FW (I think its 1.9 version now ) because my internet ADSL provider have underground cable burned, due to thunder this summer, and nobody konws when it will be repaired...so I don`t have acces to update.
but last sunday I made some autumn videos of nearby landscape  and flight went OK.  (can`t post video cause of technical issues).

peterX - what does this means?

Controller-or/and WIFI signal not available from the AC to the RC and in return.

Hi, sorry for the trouble caused. Just want to clarify, may I know what's the model of your Phantom? Can you please re-link your remote controller to your aircraft?

I have 3 standard edition.

when I turn on craft, remote and phone (with app DJI GO) I dont have camera feed on my mobile. app is working normaly, camera wheel on remote work normaly just dont have video.

smirnoff9969 Posted at 2018-9-13 04:58
I have 3 standard edition.

when I turn on craft, remote and phone (with app DJI GO) I dont have camera feed on my mobile. app is working normaly, camera wheel on remote work normaly just dont have video.

Have you connected to the Phantom's wifi before starting the DjiGo?  It's a must do.

Do you get telemetry ? If not then you did not connect you phone/tab to the birds WIFI.

WD9EON - well I don`t recall sequence of powering up ...usaly remote first, then aircraft then app...really don`t remember...

peterx - on wi-fi options I get message "conented to phantom 3..." but I noticed, button "camera" on DJI app id gray - no video feed... but if i`s blue, then I get videofeed after pressing...

If the cam button on the Go app grayed out and not solid blue then the phone is not correctly connected to the P3S system. Do you have Bluetooth enabled too? if yes then disable it....and enable the airplane mode too and see what happens.

Peterx Posted at 2018-9-16 00:57
If the cam button on the Go app grayed out and not solid blue then the phone is not correctly connected to the P3S system. Do you have Bluetooth enabled too? if yes then disable it....and enable the airplane mode too and see what happens.

ok I`ll try that.... (can`t wait my IT provider to repair those underground cables so I can be faster in reply)

Before i forget to say,i say it now . If you enable the airplane mode you may start WIFI on your phone manually.

Peterx Posted at 2018-9-18 09:26
Before i forget to say,i say it now . If you enable the airplane mode you may start WIFI on your phone manually.

that`s OK I know that

I had a problem just like this once. I think you need to link the rc. Here is a video on it: