Hi guys!
My friend got my "old" Phantom 2 Vision+ V3 when I purchased the Phantom 3 Professional.
We tried flying together today, but everytime he was up in the air I got interference / static on my screen. Even some red warning (can not remember what it said). When he powered down I could fly like normal again. Happened twice. He did not have any problems on his screen. Both iPhone 6+ running lates firmware and app versions on both.
Is there any channel / tweaks that is needed before two Phantoms are up in the air?

Thanks a lot in advance,

Tom

Tom,

In the menu section of the P3 there is a setting under the "HD" icon that is called "Image Transmittion Setting". Try changing from "Auto" to "Custom". I'm successfully using channel 13. I'm just providing this as something to try, not sure of any possible ill effects.

Jerry

salota8550 Posted at 2015-5-31 21:35

Did you start the both Phantoms at the same time?! -- If yes, I would suggest try starting one P ...

Hi and thanks for your reply!

1. No we started at different times
2. Yes we were quite close. 10 feet or so
3. Did not lose control

I will try moving further away from my friend when flying together.
Let me hear how it goes with your friend in the flight.

Cheers,

Tom

JtrJr-Droner Posted at 2015-5-31 21:43
Tom,

In the menu section of the P3 there is a setting under the "HD" icon that is called "Image Tra ...

Hi!
Thanks a lot for your suggestion. I will try that on our next flight for sure.

Cheers,

Tom