@DJI Is there any chance that you create a cable for the Ronin-S to Black Magic BMPCC 4K camera to power it? If not, any chance we at least get some kind of open end cable to build our own?

there is a dtap to bmpk4k cable available https://woodencamera.com/product ... et-cinema-camera-4k

then you can make your own ronin S to dtap cable https://forum.dji.com/thread-173395-1-1.html
so you can power two dtap devices from ronin S ...

or just go straight from ronin S to bmpk4k by cutting the dtap out

happy soldering !

Hi macaw, Black Magic BMPCC 4K camera is not in the compatible list, but Ronin-S can be stabilized when being used with cameras that weigh less than 3.6 kg, with a width smaller than or equal to 205 mm, and a height less than or equal to 150 mm. However, the camera may not be able to be controlled with the Ronin-S.
Your need has been forwarded to our engineers for consideration, please note our website of the future update.

Flo the Pirate Posted at 12-13 16:16
there is a dtap to bmpk4k cable available https://woodencamera.com/products/d-tap-to-bmpcc4k-blackmagic-pocket-cinema-camera-4k

then you can make your own ronin S to dtap cable https://forum.dji.com/thread-173395-1-1.html

Thanks for the tip! I'll look into that!

DJI Mindy Posted at 12-14 03:56
Hi macaw, Black Magic BMPCC 4K camera is not in the compatible list, but Ronin-S can be stabilized when being used with cameras that weigh less than 3.6 kg, with a width smaller than or equal to 205 mm, and a height less than or equal to 150 mm. However, the camera may not be able to be controlled with the Ronin-S.
Your need has been forwarded to our engineers for consideration, please note our website of the future update.

thanks for the answer. If control is not possible, then please just offer a power cable which connects to the power out and has an (if possible angled) weipu SF 610/s2 connector for the black magic camera so we don't have to solder together stuff ourselves...

A company from Britain created the exact cable I was talking about: https://www.cinegearpro.co.uk/collections/bmpcc-4k-power-solution/products/cgpro-bmpcc-4k-dc-power-cable-f

DJI Mindy Posted at 2018-12-14 03:56
Hi macaw, Black Magic BMPCC 4K camera is not in the compatible list, but Ronin-S can be stabilized when being used with cameras that weigh less than 3.6 kg, with a width smaller than or equal to 205 mm, and a height less than or equal to 150 mm. However, the camera may not be able to be controlled with the Ronin-S.
Your need has been forwarded to our engineers for consideration, please note our website of the future update.

Here Here! I'd like to add myself to the request for the ronin s to be able to control the BMPCC4K as well.

RMS Posted at 4-25 23:48
Here Here! I'd like to add myself to the request for the ronin s to be able to control the BMPCC4K as well.

Hi RMS, thank you for your feedback, we will transfer it to our engineers for attention.

I love my Ronin S and the BMPCC 4K on there is the best setup for me right now. I would really appreciate if DJI 's engineering team could come up with a cable for me to be able to control my BMPCC 4k from my Ronin S. I have been a fan of DJI since I bought my OSMO few years back. Really enjoying everything I bought from DJI so far and never had any complain. Ronin s is the best gimbal on the market cause it's quality and stabilization ability is unmatchable by any other brand on the market right now. If cable is not coming out anytime soon. I would like to suggest a firmware update on the Ronin s. Since both Ronin S and BMPCC 4k are equipped with bluetooth, can we make the two of them talk via bluetooth? Thanks