Firmware Update V 01.06.00.20 for the Osmo Pocket Released via the Mimo App

        

1. Added a tip prompt and display icon when connecting an external microphone.

2. Added option in settings to turn off the beeping sound when pressing buttons.

3. Optimized UI of Pro Settings.

4. Optimized Face Detection.

5. Reduced Focus Pulsing when switching between scenes.

* Firmware Size: 99Mb

Downloaded but when prompted to install, it said "Device not connected" though it was?

Any update notes available yet?
*Edit*

Just found them.

1. Added a tip prompt and display icon when connecting an external microphone.
2. Added option in settings to turn off the beeping sound when pressing buttons (finally)
3. Optimized UI of pro settings.
4. Optimized face detection.
5. Reduced focus pulsing when switching between scenes

99mb download

Was able to download but not tested.

Wish the 4K/60fps file transfer was addressed.

Unfortunately no change in timelapse intervals or addition of ISO limiter. Active track still keeps the subject too high in the frame...Honestly apart from the option to disable the beeps I cannot see any difference.

The claimed improvements (better focus etc.) need to be tested of course...

NeonAura Posted at 4-2 05:53
Downloaded but when prompted to install, it said "Device not connected" though it was?

Loose phone connections? Did you try again?

CemAygun Posted at 4-2 07:02
Unfortunately no change in timelapse intervals or addition of ISO limiter. Active track still keeps the object subject too high in the frame...Honestly apart from the option to disable the beeps I cannot see any difference.

The claimed improvements (better focus etc.) need to be tested of course...

I feel the same way. I am very disappointed.

v01.05 skipped .....

Reducing focus pulsing - thanks for hearing my complain and fixing it. I'll check it out.

Wiz33 Posted at 4-2 07:04
Loose phone connections? Did you try again?

I did and now it comes up with the Mimo screen controls (but now I don't get a prompt about the firmware) so it recognizes the connection.  Is it time to reformat my micro card?

Hello and good day Gulfstream. Thank you for sharing this information with us today. Great find and thank you for your valued support.

NeonAura Posted at 4-2 07:52
I did and now it comes up with the Mimo screen controls (but now I don't get a prompt about the firmware) so it recognizes the connection.  Is it time to reformat my micro card?

When connected to Mimo press the home icon and the update should show

Well, I get told the download failed, network not available.

tried 2 different networks. both wifi.

Typical

Can anyone tell me where the option to turn off beeps is located? I have the latest version of the Mimo app, but I'm having a hard time finding it.

I also tried using the wifi/bluetooth connection. still says no network connection.

Oh well, I didn't see anything in the firmware update that rocked my world. I guess I can do without it.

To disable the beep -, from main screen, swiped down to get into settings (the gear icon), go to the far right (swipe left?) .

Arc Light Posted at 4-2 09:28
Can anyone tell me where the option to turn off beeps is located? I have the latest version of the Mimo app, but I'm having a hard time finding it.

Can't do it from the Mimo app - on the Osmo Swipe Down to get the Gear Icon, Press it, then swipe left 2 screens, you'll see Key Tone. That is the setting to turn off.

CemAygun Posted at 4-2 07:02
Unfortunately no change in timelapse intervals or addition of ISO limiter. Active track still keeps the subject too high in the frame...Honestly apart from the option to disable the beeps I cannot see any difference.

The claimed improvements (better focus etc.) need to be tested of course...

Same ,I couldn't find much of difference

Except  switching beep  on/off and Time remaining on your card ..Which used to be like 59.59 + ..Now ,it shows 65 minutes left .
- Still waiting for atleast 4 timelapse intervals
- 4k option while recording Timelapse /motion lapse .
- 9 x 9 =330 degree panorama option

Arc Light Posted at 4-2 09:28
Can anyone tell me where the option to turn off beeps is located? I have the latest version of the Mimo app, but I'm having a hard time finding it.

Use  the device to switch it off under settings menu .

So I erased my memory card - format. It still has a network issue. Then I did a reboot on the camera and the iPhone X, nothing. Then I rest the OP to factory settings and still nothing.

So, now I'm back further than I was when I started.

Does anyone have a suggestions. I don't even get the new download firmware notice on my screen.

HELP!!

Wiz33 Posted at 4-2 07:04
Loose phone connections? Did you try again?

It must be connected because it's comes up camera mode; but no new firmware indicator.  I tried putting in a new micro card which didn't ask to format but did allow me to take a photo and save it so that seems ok.

DJI-Osmo-User-1 Posted at 4-2 09:07
When connected to Mimo press the home icon and the update should show

OK, I turn on the Oslo and a vertical blue/green line tells me its connected.  Then a white box come up and instantaneously disappears.  The only thing I could glean is USB.  Right now Osmo needs recharging.   Thinking I may try again when I can plug the USB port direct.

I checked my firmware info and it's at 01.04.  Would that have something to do with it?

anyone seen the 'Added a tip prompt and display icon when connecting an external microphone.' looked on the OP and in the MIMO app nothing?

DJI-Osmo-User-1 Posted at 4-2 09:07
When connected to Mimo press the home icon and the update should show

I did that but it just went to tutorials.  Did not see anything about firmware.

DJI-Osmo-User-1 Posted at 4-2 09:07
When connected to Mimo press the home icon and the update should show

I did that but it just went to tutorials.  Did not see anything about firmware.

TheCameraGuy Posted at 4-2 11:17
So I erased my memory card - format. It still has a network issue. Then I did a reboot on the camera and the iPhone X, nothing. Then I rest the OP to factory settings and still nothing.

So, now I'm back further than I was when I started.

I had a similar issue on the previous firmware until I manually updated the Mimo app from the App store.  I'm not sure if this may help.  I'm at work now so I haven't tried the new firmware.  Are you connecting directly to the phone with the phone adapter?  

Gulfstream Posted at 4-2 10:39
Can't do it from the Mimo app - on the Osmo Swipe Down to get the Gear Icon, Press it, then swipe left 2 screens, you'll see Key Tone. That is the setting to tun off.

Thank you all for the info about the beep control, silly me I assumed you could do it from the app, maybe that will come in a future app update.

Just updated with no problem. It took approximately three minutes to complete. Around the 62% upload mark, the program said it would restart the Osmo Pocket which happened around the 70% upload complete mark. At 80%, the Osmo Pocket seemed to shut down again and shortly after I got an 'Upload Complete message.  Firmware in Osmo Pocket indicates updated firmware but can't find anywhere on the App or in the Osmo Pockets screens as to where to turn the beep on /off.

[Edit]
Having to recharge my Osmo Pocket now before trying out adding an external microphone. Still can't find a beep kill switch.

Joemar7 Posted at 4-2 11:46
I had a similar issue on the previous firmware until I manually updated the Mimo app from the App store.  I'm not sure if this may help.  I'm at work now so I haven't tried the new firmware.  Are you connecting directly to the phone with the phone adapter?

My mimo is latest - 3.0 but it did that update automatically.

Now OP is better than perfect. Thanks DJI. I appreciate your “quick” responsiveness.

Ray-CubeAce Posted at 4-2 12:39
Just updated with no problem. It took approximately three minutes to complete. Around the 62% upload mark, the program said it would restart the Osmo Pocket which happened around the 70% upload complete mark. At 80%, the Osmo Pocket seemed to shut down again and shortly after I got an 'Upload Complete message.  Firmware in Osmo Pocket indicates updated firmware but can't find anywhere on the App or in the Osmo Pockets screens as to where to turn the beep on /off.

[Edit]

On the Osmo: Swipe Down to get the Gear Icon, Press it, then swipe left 2 screens, you'll see Key Tone. That is the setting to turn off.

Found the key-tone switch.
Swipe down to gear symbol. Press gear symbol. Two swipes to the left.
It works.

Gulfstream Posted at 4-2 12:45
On the Osmo: Swipe Down to get the Gear Icon, Press it, then swipe left 2 screens, you'll see Key Tone. That is the setting to turn off.

Ha! beat me to it

Is it just me or does the phone screens' gimbal control seem more responsive?

NeonAura Posted at 4-2 11:31
It must be connected because it's comes up camera mode; but no new firmware indicator.  I tried putting in a new micro card which didn't ask to format but did allow me to take a photo and save it so that seems ok.

I think it did the download as it did the percentage countdown but then it wouldn't let me install.  That's the point I'm at.

Oh-no Posted at 4-2 07:38
v01.05 skipped .....

I wonder.  I'm at f01.04 and I thought I was constantly checking for firmware updates.  

Well, at least it goes into the parked position super quick now.

cannot install fails at 52% everytime...
it happened to me with the first firmware update... but some days after, and with another phone, it worked and then I could also update to 1.04... but this time with 1.06 again with the same problem to fail at 52% install.

Anton U. Posted at 4-2 12:45
Now OP is better than perfect. Thanks DJI. I appreciate your “quick” responsiveness.

lol, that's what you think...……………….LMAO

hedac Posted at 4-2 14:17
cannot install  fails at 52% everytime...
it happened to me with the first firmware update... but some days after, and with another phone, it worked and then I could also update to 1.04... but this time with 1.06 again with the same problem to fail at 52% install.

Often, with new releases, the servers get flooded. Since none of the updates are life changing, just wait a while and it should lighten up.