Please select Into the mobile phone version | Continue to access the computer ver.
Issue with Nikon Z6 Mount
453 1 2019-4-11
Uploading and Loding Picture ...(0/1)
o(^-^)o
Adam D
lvl.1
United States
Offline

I just picked up a new Ronin-M yesterday (cool device) but seem to be having an issue with the base plate that gets mounted to the bottom of the camera... the screws that came with the Ronin-M base plate don't seem to work.

I'm using the long sliding portion of the base plate and the screws that have a little stand off (know what i mean?) on them. That's what the instructions said to use... but when I tighten it down all the way, it never secures it. It eventually bottoms out in the Nikon and it's never secure. I had to use the flush moutn style screws in the center long opening (which is against the instructions) to make it work.

Anybody else have this issue? I tried this both on the Z6 body and the Z6 lens adapter (Z mount to F mount)... same issue on both. Not sure if this is just a Z6 issue or an issue across nikons. I have not tried my D610 since I don't use the D610 for video.


2019-4-11
Use props
dantastic
lvl.4
Taiwan
Offline

I haven't had this issue, only used the ftz adaptor
2019-4-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules