Please select Into the mobile phone version | Continue to access the computer ver.
Early models of the Spark middle screws.
549 10 2019-6-16
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_CyRhb51344G3
lvl.2
United States
Offline

I have one of the early models of the Spark with broken Gimbal. I have purchased new gimbal camera but I cannot unscrew te middle screws to replace the broken one.

I have tried bunch of diffrent screwdrivers but the middle ones are not deep enough for H1.5 to turn. I don't want to force and broke the thread.

What kind of screewdriver do I need?


2019-6-16
Use props
DJI Tony
Super Moderator

Offline

Hi, we're sorry for the inconvenience. We would recommend sending the unit into our facility if the drone has damage to possibly use the warranty as we don't recommend fixing the drone by our customer's end due to warranty avoidance. However, if your drone is no longer under the warranty period, you check our recommended repair service which can be reached via the link below. We do appreciate your understanding.

https://www.dji.com/service/repair/centers
2019-6-16
Use props
Wolferl
Captain
Flight distance : 22615 ft
Austria
Offline

Hi,

Can you show us a photo which screws you mean?

Cheers,
Wolferl
2019-6-17
Use props
MemduhGorkem
lvl.2
United States
Offline

2019-6-18
Use props
MemduhGorkem
lvl.2
United States
Offline

Middle ones under the battery.
2019-6-18
Use props
MemduhGorkem
lvl.2
United States
Offline

And unfortunately I am out of the warranty.
2019-6-18
Use props
LMuliolis
lvl.2
United States
Offline

Same here..   No reply?
8-7 13:47
Use props
MemduhGorkem
lvl.2
United States
Offline

I've ended up to sending it to DJI support for fix.
8-7 13:52
Use props
LMuliolis
lvl.2
United States
Offline


The middle screws have a drop of glue to notify DJI of tampering.  You can pull it out with a needle.   
8-7 19:08
Use props
Ivan03Rus
lvl.1
Flight distance : 1752 ft

Russia
Offline

Can confirm LMuliolis info - no special tool required, only a needle to remove two small pieces of silicone inside these nuts, all 6 screws are 100% identical
8-8 02:53
Use props
MemduhGorkem
lvl.2
United States
Offline

They were not silicon filled. The holes were too shallow the screwdriver couldn't grip.
When service fixed the drone they have replaced them with good ones.
8-9 08:13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules