DJI Support
Administrator
Flight distance : 2408 ft
Hong Kong
Offline
|
Overview:
Date : 2019.11.28
DJI Force Pro Firmware : v1.3.0.20
DJI Pro Wireless Receiver Firmware: v1.2.0.10
DJI Pro Assistant for Ronin (PC) : v2.0.2
DJI Pro Assistant for Ronin (Mac): v2.0.2
What’s New?
- Added camera settings for RED camera, including Start/Stop Recording, ISO, Shutter Angle, Aperture, Fps, and White Balance. Set the values according to the supported range of the camera.
Notes:
- Update the firmware through DJI Pro Assistant for Ronin by connecting the USB-C port on DJI Force Pro to your computer. Do not disconnect the DJI Force Pro from the computer during update process.
- Make sure to update both the gimbal and DJI Pro Wireless Receiver to the latest firmware. Otherwise, DJI Force Pro will not be able to control the gimbal. Restart the gimbal after the update is complete.
- If the firmware update fails, restart the DJI Force Pro and reconnect the USB, and retry.
-------------------------------------------
Overview:
- Date: 2019.08.28
- DJI Force Pro Firmware: v1.2.0.10
- DJI Pro Wireless Receiver Firmware: v1.2.0.10
- DJI Pro Assistant for Ronin (PC): v2.0.2
- DJI Pro Assistant for Ronin (Mac): v2.0.2
What’s New?
- Added support for DJI Ronin-S and DJI Ronin-SC (requires DJI Ronin-S firmware v1.9.0.80 or later and DJI Ronin-SC firmware v1.1.0.0 or later).
- Fixed text errors.
Notes:
- Update the firmware through DJI Pro Assistant for Ronin by connecting the USB-C port on DJI Force Pro to your computer. Do not disconnect the DJI Force Pro from the computer during update process.
- Make sure to update both the gimbal and DJI Pro Wireless Receiver to the latest firmware. Otherwise, DJI Force Pro will not be able to control the gimbal. Restart the gimbal after the update is complete.
- If the firmware update fails, restart the DJI Force Pro and reconnect the USB, and retry.
|
|