Please select Into the mobile phone version | Continue to access the computer ver.
DJI Accessories ?
1653 1 2019-9-22
Uploading and Loding Picture ...(0/1)
Second Officer
  • >>>

On this page, under the 'Expansion' section, DJI mentions that the RM has 46 Customizable components and six PWM ports.

There is also the picture below with some not-yet available accessories. Do we know any more about this?

Use props
DJI Stephen
DJI team

Hello and good day JB63. Thank you for reaching out. There are up to 46 modules of the DJI Robomaster S1 that can be accessed and controlled through programming, including the chassis, gimbal, Blaster, armor, LEDs, and more. In addition there are also 6 PWM ports on the Motion Controller, which are mainly used for the control of the servo ( it is recommended to use the standard servo cable ) and LEDs. The duration of high-level performance over the specified time period can be controlled by running a program to set the output percentage for the PWM port in RoboMaster Lab. For further details, please open the RoberMaster app, go to LAB, RoboAcademy, and Visual Programming Guide. Thank you.
Use props
You need to log in before you can reply Login | Register now

Credit Rules