Please select Into the mobile phone version | Continue to access the computer ver.
c
707 5 2019-10-8
Uploading and Loding Picture ...(0/1)
o(^-^)o
AntDX316
Captain
Flight distance : 2982907 ft
  • >>>
Offline

c
2019-10-8
Use props
DJI Tony
Super Moderator

Offline

Thanks for sharing your work with us. For a friendly reminder,  please be mindful that it's not recommended modifying the firmware as this may change the behavior of your drone. Thank you for understanding.
2019-10-8
Use props
AntDX316
Captain
Flight distance : 2982907 ft
  • >>>
Offline

DJI Tony Posted at 10-8 13:27
Thanks for sharing your work with us. For a friendly reminder,  please be mindful that it's not recommended modifying the firmware as this may change the behavior of your drone. Thank you for understanding.

Of course but the settings out of the box are not ideal.  Even the gimbal settings out of the box of the M2P and Inspire 1 X3 are wrong.  Idk how anyone can control smoothly w/ those settings.  Maybe if you have 0ms delay at the factory when designing it's great but when you factor in the delay it takes from an input to the feed it makes no sense.
2019-10-8
Use props
AntDX316
Captain
Flight distance : 2982907 ft
  • >>>
Offline

I just tested the dampening gain to 120 and it made the drone solid as a rock w/o oscillations but I didn't fly fast enough to see.  It was just fly a bit and hovered.  Smoother than ever.  Probably due to lack of wind.
2019-10-8
Use props
Montfrooij
Captain
Flight distance : 1915335 ft
Offline

Thanks for sharing
2019-10-8
Use props
DJI Tony
Super Moderator

Offline

AntDX316 Posted at 10-8 13:36
Of course but the settings out of the box are not ideal.  Even the gimbal settings out of the box of the M2P and Inspire 1 X3 are wrong.  Idk how anyone can control smoothly w/ those settings.  Maybe if you have 0ms delay at the factory when designing it's great but when you factor in the delay it takes from an input to the feed it makes no sense.

Hi, thanks for the prompt reply. Upon receiving the DJI products, it would automatically be set on the default mode. You may change the settings on the app depending on our needs when using the particular drone. Thank you for your support.
2019-10-19
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules