Hi, i am so sorry to write here, but i have had a very big bad luck with my mavic mini, after 4 day since i bought it, the MM has crashed from an altitude of approximately 80m, has gave me a message on the phone "the motor blocked" or something and fall down very quickly, now i sent it to the store where i bought from, they will send it to the service, the flight data will post here and the video saved on the cache phone is here
Can anybody tell me what went wrong in my case? Thank you all

Did you keep swapping between sport and P mode?  Seems a little unusual.  I would open a case with DJI.

no, the drone itself made it, not me, i was looking to her how did fall down and i couldn't push up, i tried to hold in the air but i couldn't do that

Hello and good day WooZie. I am sorry for the trouble and to know what happened to your previous flight with your DJI Mavic Mini. Since this issue is unfortunate issue happened. It appears that this issue needs to be diagnosed by our team. You can contact our DJI support team to start up a case by using this link. We hope to hear from you soon and looking forward to resolve this as soon as possible. Thank for your support.
https://www.dji.com/support?site=brandsite&from=nav

Thank you, i already take back the product to the store and they will send to the service center to germany, the case is open. I just want to know from eperienced users here, what could be caused that issue. I am sorry if i disturbed somebody

the video was not saved i see, i will post it again here https://youtu.be/NfKWFMgmYSQ
video

What site is that you used to create the chart?

WSUPolar Posted at 11-19 20:54
What site is that you used to create the chart?

somebody has decoded for me the data saved in the logs at the time of the flight

the drone is on the way to service now

Hope you get it fixed.

is anybodu here to give an opinion about this file? Thanks

WooZie Posted at 11-23 12:52
is anybodu here to give an opinion about this file? Thanks

Hi Woozie,

If you upload your flightlog using this link > https://www.phantomhelp.com/LogViewer/Upload/
i will have a look at your log.

cheers
JJB

JJB* Posted at 11-23 13:13
Hi Woozie,

If you upload your flightlog using this link > https://www.phantomhelp.com/LogViewer/Upload/

here it is https://www.phantomhelp.com/LogViewer/SFGYO8OJNR9ONY8A8NX2/
thank you

WooZie Posted at 11-24 01:38
here it is https://www.phantomhelp.com/LogViewer/SFGYO8OJNR9ONY8A8NX2/
thank you

Hi,

Guess i can tell you nothing new....

At the end of your flight your Mini starts to spin around it axis, left yawing down.
A general MotorBlock error, but no errors specific to 1 motor in the file.

Hard to tell what happene really ; a prop fail, a motor fail, engine speed control fail?
In my chart the data when your mini starts to spin.
Hope that DJI can help you out.

The NotEnoughPower warning is throughout the flight, seen often when pushing 100 % sticks in windy conditions.IMO noting to do with your loss.

cheers
JJB

JJB* Posted at 11-24 02:46
Hi,

Guess i can tell you nothing new....

when i saw it falling i have tried to start the motors, as you can see on this log, i push the sticks in csc position, but only after i saw the yawing

here is another site with log https://app.airdata.com/flight/296e9036e668047239247ec41063bc88/GENERALNotifications