e3nity
lvl.2
Singapore
Offline
|
Hi all, i just recently received my i1. As need, a firmware update. The firmware failed and gives me a solid beep on each restart and power up.
It seems i had issues loading the new firmware.This failed firmware had cause ESC error to pop out on every attempt to unlock motors. I had
returned to my dealer to send back to DJI for a exchange. Just wondering how long turnaround will this process takes? Does anyone knows
whats the cause of this issue?
========== 2014.01.01 00:00:12 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:10 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2015.06.08 19:27:42 =====================
Packet: WM610_FW_V01.02.01.06.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2015.06.08 19:28:40 =====================
Packet: WM610_FW_V01.02.01.06.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:10 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:10 unsynchronized ======
Packet: WM610_FW_V01.02.01.06.bin
========== 2015.06.08 20:36:43 =====================
Packet: WM610_FW_V01.02.01.06.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2015.06.08 20:38:20 =====================
Packet: WM610_FW_V01.02.01.06.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
|
|