Bruxx3d
lvl.2
Canada
Offline
|
djiuser_9XLEGQ5nY3iK Posted at 3-3 07:32
Would be nice if one day DJI added a system so we could create our own OSD elements. Then we could have all kinds of things like the mAh per KM above or even distance till empty at current speed.
Another useful one I think would be Air unit temperature. With summer coming up folks will be worried about how the Air unit will cope. Last thing you want is an unexpected overheat miles out. Would be good if they added a feature that made the Air unit run cooler to prevent shutdown so if you do overheat it tries to maintain the signal rather than just shutting down the link. It could bump down to 400x300 pixels at 15fps or something. Maybe even stop transmitting video but keep pinging keep alive packets for a second every ten seconds to reduce heat.
- Would be good if they added a feature that made the Air unit run cooler to prevent shutdown so if you do overheat it tries to maintain the signal rather than just shutting down the link. It could bump down to 400x300 pixels at 15fps or something. Maybe even stop transmitting video but keep pinging keep alive packets for a second every ten seconds to reduce heat.
Dji already implanted something like that I think, first you need to enable auto - protection on. When your DJI FPV Air Unit overheats, it enters Low Power mode, the frame rate and control distance will drop, the latency will increase, and videos cannot be recorded BUT the air unit will not shut down instantly
I already experimented this and its flyable but not ideal at all, it give you a fews time to land. |
|