Check the video at 0:52 sec

Super easy now to range in the combo case.

Almost 6 months stored like this, in combo case, never had a problem with drop offs involuntary descent, never changed any props.

hallmark007 Posted at 4-30 15:31
Almost 6 months stored like this, in combo case, never had a problem with drop offs involuntary descent, never changed any props.

[view_image][view_image]

Well,,,, I do not know what to think anymore.

Anyway , here with the modifications, it kept me busy for a few hours LOL
I think I will read again all your post  about props and uncommanded descent. it can't hurt

Interesting mods.

Hi, JGFLY

hear another option
Cur velcro to the Wright size stick the loop and the hook back to back once done place loop side to the case this will stick to case without sliding and the hook or soft side facing the MM this should be enough clearance for the rear props. Works well for me.

Vlas Posted at 4-30 16:52
Interesting mods.

Thanks !

Not complicated to do. If it is ever shown that the propellers have nothing to do with '' uncommanded descent '', I tell myself that it can still not hurt.

Cheers !

VLong Posted at 4-30 17:56
Hi, JGFLY

hear another option

Also very good Yes !

My 1st one was a kind of strap
wrapping the 4 motors lengthwise (see images)





Cheers !

Going to bed, Good night !

JGFly Posted at 4-30 18:44
Also very good Yes !

My 1st one was a kind of strap

I did use this as well from my 3D printer .
Good night

Nice work!

Montfrooij Posted at 5-1 00:54
Nice work!

Is there any harm in keeping my Mini open all the time. And when I go on a trip, do I just put it in the case?

Ralle Posted at 5-1 01:14
Is there any harm in keeping my Mini open all the time. And when I go on a trip, do I just put it in the case?

I don't see why it would.

Montfrooij Posted at 5-1 01:17
I don't see why it would.

I was wondering if it affects the death of the springs on the mini legs? Or am I an idiot

Ralle Posted at 5-1 01:44
I was wondering if it affects the death of the springs on the mini legs? Or am I an idiot

I'm not sure in what position they will be stretched more.

Montfrooij Posted at 5-1 01:56
I'm not sure in what position they will be stretched more.

OK

I am sure the mod is effective and probably better than anything else... but I wouldn't like to to inflict permanent change to my Fly more case.

Here's how Critter's rear props are kept together (same for front ones).

m80116 Posted at 5-1 02:14
I am sure the mod is effective and probably better than anything else... but I wouldn't like to to inflict permanent change to my Fly more case.

Here's how Critter's rear props are kept together (same for front ones).

Sorry, Did you mean you could keep the mini's legs open and it wouldn't load the springs ?Or did I misunderstand.

Montfrooij Posted at 5-1 00:54
Nice work!

Thank you Sir !

m80116 Posted at 5-1 02:14
I am sure the mod is effective and probably better than anything else... but I wouldn't like to to inflict permanent change to my Fly more case.

Here's how Critter's rear props are kept together (same for front ones).

You are quite right !

As for me, I like to experiment and share it, can lead other DIY enthusiasts to find other ideas.

Cheers!

JGFly Posted at 5-1 03:53
Thank you Sir !

You're welcome!

      15/5000

[color=rgba(0, 0, 0, 0.87)]I'm trying too!

rooller71 Posted at 5-1 04:51
15/5000

Not a bad idea !  Forgot to try it before removing bottom LOL