I received my Mavic Mini yesterday and got it set up, updated firmware etc and everything was fine. Today I was ready to actually fly it but it won't turn on, battery indicator lights show up fine but the drone won't power on. It was fine yesterday so I don't get why it isn't working now. Any help would be really appreciated.

Did you remember to short press and then long press the power button?

Page 4 of the quick start guide:
https://dl.djicdn.com/downloads/ ... ick_Start_Guide.pdf

If that doesn't work then something is wrong with your Mini :-(

The Duck Posted at 5-3 06:12
Did you remember to short press and then long press the power button?

Page 4 of the quick start guide:

I am doing the a short press followed by a long press but it doesn't turn on. I have emailed support so will most likely just have to wait and see.

Post a short video .

hallmark007 Posted at 5-3 06:24
Post a short video .

https://youtu.be/od0wqUU4pcw

reegy Posted at 5-3 06:44
https://youtu.be/od0wqUU4pcw

Looks a bit fast to me, press release then press and hold

TDZHDTV Posted at 5-3 07:23
Looks a bit fast to me, press release then press and hold

Still no luck, I have no problem turning the controller on so I don't know why the drone would be any different.

Did you activate the battery by charging it for quite some time ?

m80116 Posted at 5-3 07:55
Did you activate the battery by charging it for quite some time ?

Yep fully charged the battery before turning on the drone on for the first time.

reegy Posted at 5-3 06:44
https://youtu.be/od0wqUU4pcw

Press looks quick but it might be just the video if managed RC , it’s a tough and really don’t know, can you discharge battery and recharge or do you have another battery.

Have you ever started it , just wondering what FW you’re on ?

Might just be DOA but very strange.

hallmark007 Posted at 5-3 09:27
Press looks quick but it might be just the video if managed RC , it’s a tough and really don’t know, can you discharge battery and recharge or do you have another battery.

Have you ever started it , just wondering what FW you’re on ?

I got the fly more combo and have tried each battery with no luck. I started it yesterday updated firmware and did a quick "flight". Literally just hovered in my living room to see that it works.

reegy Posted at 5-3 09:48
I got the fly more combo and have tried each battery with no luck. I started it yesterday updated firmware and did a quick "flight". Literally just hovered in my living room to see that it works.

Yeah that’s strange and impossible to get into assistant to do factory reset. I suppose you can only keep trying until you have to send back .

Tough brake.

there's no other way than to send back to DJI when AC have no powered up, it's hard to do some downgrade/refresh FW with DJI Assistant

So after flying it for 4 weeks without any problems. I’m not able to power on my drone. It has a fully charged battery, which the drone is recognizing the battery but after the short press, Still not cutting on

Similar issue faced by me; in my case Aircraft doesnt switch ON at all; Remote controller no issue.

djiuser_21y8nMokHPoZ Posted at 9-7 16:21
So after flying it for 4 weeks without any problems. I’m not able to power on my drone. It has a fully charged battery, which the drone is recognizing the battery but after the short press, Still not cutting on

So what happened finally'; you logged a case and DJI fixed it ?