Please select Into the mobile phone version | Continue to access the computer ver.
Camera viewfinder hitting roll motor
282 5 2020-5-30
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans26d3c1f3
lvl.1
India
Offline

I have the Z7 with the 24-70mm f/4 lens. Both are in the compatibility list of the Ronin SC.


When I try to stabilize the tilt axis when stabilizing the camera, the viewfinder eyepiece of the camera is hitting on the roll motor of the gimble. Picture attached. How do i go about this?






20200530_193436.jpg
2020-5-30
Use props
Indio
First Officer
Flight distance : 56322 ft
  • >>>
Austria
Offline

additional weight on the flash shoe for the example

or

https://www.smallrig.com/smallri ... -s-gimbal-2308.html


in any case the camera must be heavier


2020-5-30
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Hi there, you may remove the eyepiece or use a counterweight. 1.png
2020-5-31
Use props
fans26d3c1f3
lvl.1
India
Offline

Yes, I have removed the camera viewfinder rubber cushioning but still, the camera lightly scrapes the motor.

I will look at how I can add counterweights
2020-5-31
Use props
fans26d3c1f3
lvl.1
India
Offline

DJI Thor Posted at 5-31 03:52
Hi there, you may remove the eyepiece or use a counterweight.[view_image]


Yes, I have removed the camera viewfinder rubber cushioning but still, the camera lightly scrapes the motor.

I will look at how I can add counterweights
2020-5-31
Use props
fans26d3c1f3
lvl.1
India
Offline

Indio Posted at 5-30 10:36
additional weight on the flash shoe for the example

or

Thanks for the suggestion. The products looks like it will solve the issue. Will try it out soon.
2020-5-31
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules